It's all about the Software

Hi,

It would be useful to have the squelch command (the equivalent of the SQ command in the official Kenwood TS-2K protocol) supported in the serial cat protocol to be able to manipulate the value (read/write) in the same way that we have the AG...

hello
will be great if you can add a SA44B — 4.4 GHz Spectrum Analyzer

do you thing it is possible
thanks
and by the way i love sdr console

Is thera any change impelement TCI Protocol for CAT. TS2000 with Omnirig is one kind of pain if you use up / down converter, example LOG4OM cant go QO100 frequencies, its show offliine.
If you go under 2ghz its start show freq. As far i know,...

Greetings all @ SDR-Radio.
My request is for a pop-up Deviation Meter, similar to the pop-up signal strength meter.
It would need to be able to read up 100kHz deviation depending on what mode, eg NFM, WFM, BC-FM is in use.
I use your program along...

Hello,
I've been using your software with my RadioBerry that has started to gain traction again and am curious. Is there any possibility for a release the includes a dark mode for the window colors? With the customization of the waterfall colors, a...

Hello,
I miss a good noise blanker in SDRC. Regardless of the settings in SDRC, I don't see any effect at all of the current noise blanker. Thus I can't use SDRC during the summer months :( since I live in the country side with electric fences close...

I am using the SDR console with an Adalm Pluto, can I also insert the Doppler correction in the Adalm Pluto TX circuit in satellite mode, unfortunately I have not found it, probably only possible with an external transceiver or a second Pluto via an...

Hi All. Could simple hamlib server support be added? In this way SDRConsole would appear as a hamlib server to handle setting/getting the frequency and mode.

You would start a TCP server and repond to only four command, sent in plain ASCII:
F XXX =...

Hello.
This is the second time I ask for this feature. There were no answers to the first one so I am going to insist,
Probably nobody is interested in signal analysis, but Antonio and me do like it.

When using the crop option of the data file...

I'd like to see memory channels, when chosen, to be highlighted just like the frequencies in the receive pane. The receive pane frequencies have a light blue appearance when active.

how about a freq drift tracking software for inmarsat c band and L band data. i have looked at the geostationary beacon software. seems if it was modified for all freqs it could work?..possible a automatic frequency correction.

Hi, this is rtlsdrblog, I manufacture the RTL-SDR Blog V3 and V4.

The V4 requires that the EEPROM have the manufacturer string be set to RTLSDRBlog and the product string be set to Blog V4 for the librtlsdr drivers to differentiate between the...

Hi Simon,

A FM network broadcaster in Australia in currently trialling the Long PS (Group 15A) feature of RDS (Radio Data System), now on air
from multiple transmitters.
I note that SDR Console is unable to currently display Long PS (LPS).
Can you...

Dear all,
let me first of all thank you very much for bringing out such a great software. I love my SDR Console very much.

To even enhance usbility I would like to request for a feature as I did not yet find a way to do that with existing...

Hi.
It will be very practical an option to send Analyzer>crop window parameters directly to data file editor to extract one or more signals from a wideband file.

Best regards.
ANgazu.

Hello,

i am using the favourites list windows very often . I also have a long list of favourites which i am going thru daily ( intruder monitoring ) . It would be superb if i could use the keyboard ( enter ) to activate the current line. I can...

This is the scenario: I'm using an IC705 for transmit/receive on Es'Hail-2. I have a Lime SDR attached as an external radio to enable me to monitor my transmit signal via the satellite as required. The Lime tracks the Icom OK.

However, my transmit...

I use a home built MIDI controller and it really makes my life so easy when working contacts on QO-100 with the Pluto and SSB contacts on the Hermes-Lite2 while sitting back and talking. It will be so awesome to have RIT on the MIDI controller then...

Hi, first of all,sorry didnt read the whole forum!
Is it possible to implement Flrig for controlling external radio.
Im switching from Port cloning and using hrd and omnirig to flrig.
But now not possible to change frequency by clicking waterfall...

I use SDRConsole for preferance with my SDRPlay DX but have recently bought the remarkable BELKA all mode RX for mobile SWLing. It provides an IQ output for use via a computer sound card and together with a laptop, would be very useable. For...

When CW mode active, a means to park the peak of the CW signal in the middle of the filter window, like many HF transceiver's can do. I think it's essentially a search for peak signal strength +/- from the current VFO.

Also the ability to choose CW...

SDRConsole has now become my fav SDR software, and I keep finding more and more wonderful and powerful features.

If I could make one request... That would be a configurable RX window (?) Tile (?) that can float, rather than the current offering....

Support in the way of a macro-editor for automating SDRConsole.
Specifically, being able to map a key combo triggered by an external keypad (could be connected via USB, might be Bluetooth) input to the program, and have it kick off one or more...

Good morning. I would like to know if compatibility with the new SDRPLAY RSP1B will be added to the SDRConsole in the future. Thank you, kind regards to everyone

Hello,

Many times, I'm just listening to some radio while the satellite AOS starts without paying attention. It is switching at LOS, but if changed, it won't come back automatically when the recording starts. I have to do that manually.