It's all about the Software

I am a BCB DXer using an Airspy HF+ Discovery. Most of the time I record the baseband (a little under 1 mHz wide) and look for interesting finds later. I've been using SDR-Consile nearly a year.

I just realized what a tool Analyser could be. I used...

Hi,

let's assume you are using the following configuration:

==max 5w==> ==max 50w==> ====>

My tuner will propably die if I would tune it with 50W so I set the drive slider to a low value. In order to prevent accidently alteration of this value...

Hello,

please make it possible to trigger a few of the voice keyer recordings via the MIDI controller.

Thank you very much
odie

Hi,

first of all my situation: On my station PC, I am running SDR Console, a software for controlling a remote antenna switch and a self-written tool that motivates a remotly installed ATU to find a new tuning solution the next time it will see RF....

Hi

Congratulations, SDR Console is amazing.
I use it for long time on QO-100.
I tried several other SDR programs and SDR Console is by far the best one.

I would like to request a feature. And a sub-feature.

I have 2 SDR receivers connected to the...

Hi Simon,
I think this may have been requested before. Is there any chance to be able to produce a waterfall of a complete IQ recording? I use Data Analyser to check my recordings but that can take a long time to analyse several hours worth. I know...

Simon,

Currently the info box (while hovering) displays beam headings from the home station to the cursor position on the map. I am wondering can you add beam headings (selectable) from the cursor position TO the home station. This is very useful...

I've been playing with the RX88 MK II I now have. As it stands the main window zoom feature is useless. It always expands around 16 MHz. (Where's 128 ksps or better user settable sample rate?) I can fool it by setting the nonexistent LO frequency to...

Dear Simon,
I would appreciate ON/OFF options for Dither and Random, as they are available for RX-888 (Receive > DSP > Radio).
SDR Console is my favourite SDR UI; thank you very much for your great work and effort!
Walter HB9AJG

I use my SDR as both an enhanced panadaptor for my IC-7300 and as a second receiver. I don't want tracking enabled much of the time - I'm using the two receivers separately. I will watch the SDR waterfall, looking for something of potential...

Hello,

Might it be possible to alter the Frequency box that comes up when pressing a number
such that it also allows the setting of Span ?

Like the box that appears in Home/Frequency which has both.

Thanks for considering.

Regards,
Bob

Special Points Requests

Shaded = For some time this parameter must be reset each time the program is opened. He didn't need it before.

Resolution = The same is true for the value of the chosen resolution, each time the program is opened, the value...

Displaying Markers, Memories and DX Cluster spots in the spectrum display is a great feature but could be so much better if clicking anywhere in the line of text of the Marker/Memory or Spot took you straight to that frequency.

Or if it's too...

I looked thru the list of requests but it was so long...

Can you create a dark theme if you haven't already? also, P25 and DMR, will you ever allow audio? I can decode it but cannot get any audio.

Please consider adding decimal point at the digital signal strength meter, as present in the analog signal meter.

Tnx

73 Rocco IK8XLD

I could not see this on the list but sorry if I missed it.
The matrix or the receiver windows can allow you to have up to 24 receivers open at once.
They have Select, Mute as their options.
Is it possible to add a 'Lock' option.
When selected the...

Hello Simon,

long time ago, I asked about the function (see my older message), but since I didn't got any new or answer.
Function would be temporary allow listen to audio on

For the SDR Console suggestion box:

1. Please consider expanding the Visual Gain setting. Currently it goes from +30 dB to -40 dB in 5 dB steps. I'd like it to go down to at least -75 dB in 3 dB or finer steps. That would allow me to approximately...

It would be very useful to be able to edit the entries set up in the scheduler. One may want to make small changes to when the recording starts and stops, recurrence etc. The option now is Copy , and consequently deleting the old entry after making...

Hi All,

frequently I use a virtual audio cable to transfer audio to 3rd party applications (fldigi, navtex and dsc decoder and few others).
Sometime I need to briefly monitor the audio being transferred, but usually that require some operations on...

When I am chasing NDBs, I do it visually with the waterfall. I use the X8 resolution which is pretty good for closely packed beacons. But there are times when it isn't good enough. I have tried slowing down to 10 lines/sec which makes a smaller bin...

As a Satellite operator
I Want to have the possibility to control the External radio in the Satellite windows with Midi controller and keyboard shortcuts
So that I do not need change the frequency of the connected TX radio with the mouse at the...

Simon,
Would it be possible to produce a piece of software that plots the radiation pattern of a yagi antenna.

Some thing like output 0-360 degrees in say 5 degree steps to the rotator, Then read the signal strength from the SDR in db and plot it...

Could we have a cut-off timer that clears the RDS data and completes the database entry if the RDS is no longer clocking up 'hits'? I would suggest a default value of 30 seconds as a compromise so that a rapidly changing signal doesn't trigger too...

Hi all,
this is my first post and please apologize if i am posting in a wrong thread.
I have to re format my PC and i would like to know if there is a possibility to save all the details, configurations and layouts
of the program so when i re...