It's all about the Software

Hi,

i'd love to see an option to set a custom bandwidth in the radio settings. Right now i'm using sdrconsole with an sdrplay tcp server (rtltcp compatible) and the maximum bandwidth i can set is 3.072MHz while the radio can do 8MHz (which should...

The latest extio available from Oscar Steila allows upto 140Msps sampling rate and 70MHz bandwidth, is it possible to add something similar to Console? Having 16bit performance up to 70MHz from the HF port will allow simultaneous coverage of 10, 8...

Hello Simon & group. I thought I would share 5 items I wish your software could do in a future update. I currently use a RSPdx:

1. Scan memories (squelch the radio, select the memory banks you want to scan then let her rip).

2. An enable button to...

Hi,

I looked at the Digital modes screen, and what I have, apparently,
is RTTY and the PSK ones, only.

Should there also be Sitor-B/Navtex ?

If not, any chance of including in the next rev(s), (with Acars too, perhaps) ?

Much thanks,
Bob...

Let me start off by saying that IMHO, SDR-Console is by FAR the most professional and most capable of all currently available software products specifically written for SDR's. In the beginning I was an avid user of SDR# but quickly and eagerly made...

It would be very useful to be able to edit the entries set up in the scheduler. One may want to make small changes to when the recording starts and stops, recurrence etc. The option now is Copy , and consequently deleting the old entry after making...

Hi all,

I'm using .27 of the console. I would like to use the HF1 and HF2 inputs of the S3 for different antennas. How do I teach the scheduler? For example, he should switch the Asia antenna in the evening and the American antenna in the morning....

Simon,
Would it be possible to produce a piece of software that plots the radiation pattern of a yagi antenna.

Some thing like output 0-360 degrees in say 5 degree steps to the rotator, Then read the signal strength from the SDR in db and plot it...

I don't think this got moved over from the email list but I submitted the below message back at the beginning of 2020 to the email list. I'm transplanting it here, if it hasn't been done already.

I'm re-submitting my request under the new # .

I...

Most of the Frequencies that I listen to and feed to Broadcastify use DCS Codes instead of CTCSS, Like CTCSS, DCS is most common on FM two-way radio systems and it would be nice if SDR could support that so that I and others can block out the...

Hi,
due to the lack of a self-sustaining ‚Split-Function‘ some people use the RIT for that purpose e.g. in pile-ups. The consequence is, that all other added RXs take over the enabled RIT-function and the offset. This behavior is not only...

Hi,

Oops:

I wrote about this previously, but posted it in the general forum, rather than here in
the Requests forum. Sorry.

Re the WinRadio G-31 Excalibur:

I understand that the unit has a hardware pre-amp built in.

The very old WinRadio...

Hello,

The centering of a signal peak in the display by using the right Mouse button seems to
work only if the cursor is actually in the Waterfall.

With the cursor in the Spectrum view, nothing happens (at least for me) if the right mouse button...

Save the radio used when adding a new frequency (optionable ?)

Hi Simon,

iI have a DJ MIDI controller with 2 VFO-knobs .
My request is to expand the MIDI-controller to additionally tune the TX frequency.

many thanks
73 Uli, DF5SF

Simon,

Is it possible to make the RDS Editor window (the one that appears when double-clicking on an entry in the RDS log) so that it can remain visible while another function is carried out? At the moment, no other function is possible while the...

Could CTCSS (PL) Encode tones be added to the transmit function so we could access repeaters?
73 & TNX
Warren K2ORS

Hi Simon,

Another one from me (sorry!)

When setting up a recording, currently the default recording span is that of the selected radio.

Is it possible to have the user to have the option of being able to specify that the default recording range...

I was disappointed, I am hoping to see i a manual notch between 3.0.27 release notes, and instead nothing.

SEB. :( :( :(

Request for digital mode:
Add FT8 added to digital mode

Jean.

Hi (Simon) and all!
The external radio in satellite tracking is working very good for FM satellites, I have done some QSOs with an IC-705 as TX rig. The possibility to adjust the frequency from the IC-705 is very good.
But, for transponder sats with...

Is this radio going to be supported at some time?
I did search for it & got no results on this site.

Thanks,
Ed

Hello,
My request would be to have the luminescence settings of the waterfall, as well as the zoom, scale, high and low saved for each receivers because going from one band to another you have to adjust each time.
I think that for more comfort of...

Dear,

simple feature to add in the External Radio Options menu, submenu Transmit.
Please add next to the Mute Audio checkbox a additional feature that will add extra time when the TX is going back to RX. There is some delay and I get very bad...

hello

please possible add support for AR5700D
same to for AR5001 with IQ module inside

thanks