It's all about the Software

On the Perseus V5 software, there is a button ( Center ), which holds the tuning window in the center of the spectrum window as you tune with the mousewheel.
The displayed spectrum slides under the stationary tuning window as you tune.
If console...

Hello user,
I have a problem with the satellite tracker. By mistake I have set 96 hrs in the Time window.
Unfortunately, I can now no longer access the setting after calling the tracker because the prog. immediately after the call to process the...

Dear Simon,

A suggestion that might be useful in future releases.
When getting to the edge of the tuning window with the mouse click down on the receiver, it would be very useful that the receiver starts to scroll.
Let me explain with a picture:...

Could a labelled crosshair cursor be available in the Signal History window, just as there currently is in the main Analyser window? Without it, it’s difficult to find the exact value and position of a peak.

Thank you,

Jack
M0GKC

SO2R implementation with SDR Console:

- two Identities for two independent SDRs such as two ANAN or Hermes Lite etc. as Radio 1 and Radio 2.
- SDR Console would connect the serial port of virtual serial cable back to logging program (N1MM etc.) -...

Hi Simon and others,
The satellite scheduling works well and I would like to use it 24/7 even when I am away for a few days.
What I find lacking to achieve this is the ability to change antennas for the different satellites.
I have three antennas,...

Would be great to add support for Signal Hound Analyzers, to be used as an receiver.
Depending on model it can go up to 20GHz.

Hi,

I'm not sure I have this right.
Will blame it on old age now if I am, as usual, a bit confused.

A long time back I think there were some Posts about the development
of:
additional digital modes right from the program

and of a stand-alone...

Could you please add support for the 0-38.4MHz frequency range? Thanks.

I know this request cropped up on a broadcast DX forum but the original poster hasn't mentioned it here so I will. Can the RDS PS display show the characters in their original positions and maybe indicate the 8 character locations so a partial...

Hi Simon -
Playing with some more SDR radios...
My preferred platform is your SDR Console V3.1 for my Elad FM-DUO and HL2. Anan coming next...my poor 101D is quickly taking a backseat to wanting your GUI - hence the Anan....

I have in the mean...

Would it be possible to add markers (favourites, etc) at the top of the Analyser window? Perhaps as an optional sub-window at the top or something?

Good for analysing for beacons etc.

Thanks !

I have mentioned this request in general conversation, but don't remember putting it in the right place, so I shall do so now that 3.1 is released...

Currently, double-clicking an entry in the RDS log brings up an editor window with possible...

Hello Simon
with the PLUS button in receiver pane you can add another receiver so far so good ... but the X in each of the receivers do only close and mute it but the window is still there ... either use the x in each receiver box to also delete it...

I would like to have QO-100 beacon sync without secondary windows and clicks.

My desired solution:
- I tune (USB usually) until I hear the beacon
- I press a keyboard shortcut (whatever that may be)
- The program syncs RX with the beacon
- The...

Hi Simon,

Could this be added? This could be very useful.
Right click on the call sign will bring up a submenu so a quick search can be done on QRZ or QRZCQ page. Lookup can be done by configuring the api key.
right click.jpg

Please also...

hello Simon
i have a few plutos here (modding them for others) ... when i start one pluto (my main unit) that has no ppm correction or start a different one (that need a correction of as example) -0.2ppm i have to correct the ppm value each time by...

I have seen a request coming from Slawek DL6SH which has been posted to the old reflector. I'm too playing around with MAP65, so I'm posting here on his and my behalf.

MAP65 (a K1JT's application for JT65/EME) can receive I/Q stream both via a...

If i have two virtual receivers with identical settings, then isnt it possible that anything both of them receive could be phase-inverted and thus canceled
when it comes to wideband noise the blanker is satisfactory to most, but since we have...

Normally, as Automatic Schedule switches from satellite to satellite, the frequency in the waterfall and the spectrum changes to the upcoming satellite frequency. It works fine except for the first satellite. For the first satellite, the frequency...

Cw monitoring in SDR console, other than going to a third party for the cw software decoding, Simon , the question arises , have you got some codeing on an old hard drive left over from the HRD days that you could plug into SDR console ?. Yep and I...

So i admit i dont really know how sdrs or sdr software works but there is data in a “form” that sdrconsole then decodes and renders into visible and audible forms.
That original stream of bits proper prior to any FFT processing is what neural...

The same way we can map SAM to external radio's AM mode, it'd be nice to be able to map Wide-L/U to LSB/USB respectively.

I make overnight recordings of the NDB band using the scheduler. This results in 60 or so files in the specified directory for each night. After you have a few nights of recordings in there is becomes very cumbersome to navigate in the folder. So I...

Hi (Simon) and all!
The external radio in satellite tracking is working very good for FM satellites, I have done some QSOs with an IC-705 as TX rig. The possibility to adjust the frequency from the IC-705 is very good.
But, for transponder sats with...