It's all about the Software

Hello radio friends, I am desperately looking for a way to save frequencies with different RX and TX. Perhaps also a possibility to set and save a TX shift for FM relays. Is there such a possibility or is it just a wish of mine? Kind regards Oliver...

Hi Simon.

When playing IQ-recordings I often jump between different files (=recorded at a different time) and listening on the same frequency.

It would be great to have two additional Open buttons adjacent to the present Open button. One to the...

Hi guys,

Couple of suggestions..

1/

Would it be possible to enable MPX output from the soundcard when in FMB mode?

Obviously, you would need a 196KHz soundcard to reproduce the MPX signal.

I work in Broadcasting and being able to feed an mpx...

An optional roger-beep would be of interested for some people.

Regards

Matthias

www.dd1us.de

Simon bonjour
First of all, un little story.
Mon RX-666 Dragon-Fly broke down after 7 days of use.
Can't identify it by SDR Console, more recognized by USB.
Lusya, Aliexpress Company, has me commercially and graciously replaced my SDR (after...

Hi.
There has been a few questions and some confusion about the broadcast FM mode button marking ( BFM ).
One simple solution could be to rename it to BCFM or BC-FM .
For old scared SDRC users it does not make any difference as we know the meaning...

The mailing list has at least one person who is confused into thinking that the scale means something except in special cases. He's concerned that the scale is not the same locally as through the server when the scale is uncalibrated in 99% of the...

Hi All,

frequently I use a virtual audio cable to transfer audio to 3rd party applications (fldigi, navtex and dsc decoder and few others).
Sometime I need to briefly monitor the audio being transferred, but usually that require some operations on...

Reminder as requested:
Remind me to add this info to my website.

Simon Brown, G4ELI

From: main@SDR-Radio.groups.io On Behalf Of jdow
Sent: 05 November 2020 18:49
To: main@SDR-Radio.groups.io
Subject: Re: Com0com ports not showing up in...

Hi Simon,

I would like to see TX support in SDR-Server & SDR-Streamer.

Kind regards

Matthias

www.dd1us.de

Apologies to Simon (who may find this kind of SDR extension out of bounds), and others (who get fed up with my daft ideas).

Watching SDR recording playback can be frustrating at times when the originator is trying to make a point about the effect...

Hello Simon,
there are a lot of new SDRs with high bandwiths now and comming.
But as they use a huge bandwidth the lack of band-filtering and without filters they will be exposed to high summing signals and maybe suffer from intermodulation.
It is...

I'm waiting for the command list from Rune Øye so this can be integrated.

I also use SDR# and this has the ability to turn off either the waterfall or spectrum analyser and an option to turn off both.
I can't see this option in SDR Console.

For those who run SDR Console on a remote PC you don't always need these to be...

Was using my RX-888 from work the other day using the server. Works quite well actually, but I noticed the VHF gain control was missing. Fortunately it seemed to be at just about the right gain (maybe it was set to the last local setting?), but...

Hello everyone

When I activate the notch ,there is also a HPF (high pass filter ) kicking in. As I only want to remove a whistle and not lose the low frequenties is there a possiblility to change it somewhere in the software ?
I can not find it....

I have seen a request coming from Slawek DL6SH which has been posted to the old reflector. I'm too playing around with MAP65, so I'm posting here on his and my behalf.

MAP65 (a K1JT's application for JT65/EME) can receive I/Q stream both via a...

title says it
add an auto(re)start of beacon for qo100
greetz sigi dg9bfc

I think this is very easy to add this feature. Make the frequency of a spot in the DX cluster clickable. When clicking, it will change the frequency of the SDR play to the frequency of the spot.

Now we are at this feature, why not add a link on...

As if Simon isn't busy enough, here is something that is a game changer.

Check out this 32 second clip.

This would be great in any sdr console.

SDR Console's FM squelch appears to work off of signal strength. This means that any change in the broadband noise level will cause the squelch to blow open unless it's set so tight that weak but perfectly readable signals won't open it. Noise-based...

Hi

A feature i'll appreciate a lot is a scanner.

Hello Simon
Concerns video recording
I am under the version: SDR-Radio V3.0.26, 64-bit, 2020-10-07_1518.
As with standard Audio recordings, you can also highlight the presence of the recording because currently no recording information is displayed...

Been putting my RX-888 through its paces on the UHF bands over the past couple of weeks, & have noticed that I can get better performance out of it using HDSDR with the RX-888 ExtIO DLL (the one with the COMING SOON graphic when it loads). The...

I have my tuning step size for ssb set to 10hz. When I am on a crowded band, I will start from the left and tune the first signal in. Then to browse the band I will point the mouse cursor to the 1khz digit and scroll with the mouse wheel which...