It's all about the Software

Hi Simon,

I only recently discovered this feature and actually find it very useful because I don't have to launch any additional software. However, the modulation is a bit low. Unfortunately I couldn't find any setting for it.

Also, it's a little...

At the present time SDR Console cannot read the frequency information in an I/Q file recorded on a Kiwi SDR. It defaults to a 10 MHz C/F
Also, the Datafile Editor in SDRConsole is unable to handle these files

Rod

Hi everyone, it is possible to have the BiasTee function on Afedri Lan Iq receiver. Thanks

Can you please add a hold function for the maximum level?

The actual maximum level function is nice, but if the maximum level could hold for ever is better to find signals during a long time scan.
For that it would also be nice, if the speed can...

Hi,

In Servers, a graphic/world map showing the Servers that are available, and their locations ?

If so, then might it be possible to incorporate in the map where by merely clicking
on a e.g., a green pin (showing that that particular Server is...

Is there a way to use the Icom RC-28 VFO knob on Sdr console?

If not, is it possible to implement this in a future update?

Terry

(this message first ended up where?)

I find that the beacon is currently outside my Geostationary Satellite Beacon
window frequency range (possibly due LNB error due to cold weather?) and I'm
thus unable to lock on to it.

a. Is it possible to...

Hello,

What is the problem to add simultaneously decoding RDS on all frequencies from bandwidth? I guess hardware is already ready for this (in my case Elad FDM-S3 + Core i9-9900).

Thanks for the great software!

Simon, do you use this speedx improved algorithm based on ephraim-malah?

I chase NDBs and there are many in the NDB community who prefer the 8 pole analog filters to the digital filters in SDRC. I looked into this and I believe that the reason is related to the shape of the response. The analog filter commonly used has a...

Hi Simon

I would like to ask if it's possible to allow imports of .csv files into the favourites, as well as exports to .csv, similar to the markers. I'd like to add several hundred aero and maritime frequencies I have in a spreadsheet but it's...

For radios where the driver and/or SDR-Radio Console performs the FFT, is it possible to average samples to arrive at a better sensitivity and SNR?

Hi,

Might it be possible, or even good idea, some time in the future to add
a simple slider to the screen to vary the audio emphasis between Bass and Treble ?

I know about the Equalizer already implemented, but an ever-present simple
slider would...

Hi Simon,
please consider adding two buttons, + and - , near the drive command slider, to be able to precisely increase and decrease the power output.
To prevent possible damage, using the slider.
TNX

73 Rocco IK8XLD

HI!

I would really appreciate to have the frequency centered when I switch from one receiver to another in place to find it in random position on the waterfall.
I know that changing zoom will center and click also center button too.

All my best...

Dear simon, hoping these links are novel and useful to you.

I am using my ADALM-Pluto TCVR with the HYDRA 3cm TRX module (see DUBUS 3/2020) which is in fact > a frequency DOUBLER (using XX1002 = Macom frequency doubler) of the ADALM PLUTO TX e.g. 5,184,100 MHz = 10.368,200 MHz
I have a problem to read the...

Hello,
I would be very happy to be able to define and send macros to the ELAD FDM-DUO tranciever. In the same way as ELAD's own software SW2 does.
I use the macros for setting up the DUO for HF or VHF use, normal or contest CW/SSB or WSJT, split...

Hi,

I've been using SDR-Radio with three different transverters, each transverter has a different up-converter off-set.
It would be good to have memories for different transverters, that would prevent the operator to type in the frequencies every...

Hello,

Not sure if I requested this before; don't remember.
If I did, I apologize,

Not important, but perhaps something to consider.

I'm always playing around with the RF Gain Settings.
It would, I think, be a lot easier if it was implemented as...

Hi Simon,

The V3 support many Wide Range SDR's.
What the Console V3 lacks is a scan-function.

Thank you.

Regards
Fernando

Hi Simon,

In the one-time recording setup dialog there is the wonderful Range option for choosing a smaller bandwidth to record, instead of the full receiver bandwidth, and I use this feature all the time. Can it also be included in the Scheduler...

Hi Simon,

Please add the support for Elad S3 Downconverter.

Thank you.

Regards
Fernando

20211026_151438225_iOS.jpg
20211026_155242651_iOS.jpg

Hi,

Having an editable (titles, colors, transparency...) band plan 'll be very nice feature.
here are some ideas.
Personnaly, my prefered is the last one.

BP1.png
BP2.png
BP3.png
BP4.png
BP5.png

Hi,

Great software! Already donated $25 for this very useful software - actually turned away from AIRSPY to use this one. Thanks!

Has anyone suggested to have the ability to simulate Close Call? For example if you are monitoring the UHF CB band...