It's all about the Software

I am trying to run SDR Console connected to Pluto on a remote machine. I am sending the audio from my local machine to the remote machine with Remote Desktop Connection. When I transmit, I get a lot of noise on the transmit audio in Console.

I am...

Hello,

Incredible program.
Thanks so much for making it available.
Can't begin to imagine all the work that has gone into it.

Will blame my ignorance on old age now.
A great excuse for most anything.

But, please bear with me a bit.
Haven't done...

The External Radio tracking (with Icon IC-7100) worked well for a few days.

But it recently has not been working. The ? screen shows Omnirig (Version 1.20) Not Responding.

I have 2 rigs selected on Omnirig:

Rig 1: IC-7100
Rig 2: IC-7100e4-DATA...

Hello,

Using the latest (I think) version.

Using with an Icom R8600

Tunes the radio just fine, and shows the ANT selected, and the tuned freq., from the program on the radio's display as it should.

But, cannot get it to show on the radio's...

I have Console connected to my IC-7100 as external radio and an RSPdx as the SDR receiver. I also have an MFJ-1708B SDR TX switch in circuit to use my 7100's antenna for transmit (only a 2 meter for now).

Most everything seems to work ok except I...

hello, I have a little problem with SDR SERVER MANAGER, I can connect but with one (1) person maximum, it is impossible for 2 or 3 to connect to this sdr server, I opened the ports, etc. everything works well, but the problem is when 1 person...

Is there a How To to enable Win4Icom rig controller to play nice with Console plus my IC-7100? I already have the 7100 connected as an External Radio in Console in addition to my RSPdx via OmniRig. New Consle user; like it a LOT.

Suddenly, I am have trouble connecting either radio (HF+ and RSP2) to Console. Console launches fine & finds the radios but then Console fails to respond when I try to mate it with a radio. This happened on 3.2 & 3.3.

After connecting with Simon a...

Where in Console menu do I find comport setting options to sync Console with other radio apps?

I will be using com0com.

Hello,
This is my first post and I'm not sure if this is the right place...

A quick intro. I'm a radio amateur, vk2ezf, licenced for 50 years, ex IT professional, and have been using various SDR software for a number of years. But only just came...

Hi,

I am trying to interface the SDR Console V3.3 with Log4OM2.

I am not succeeding to get the VFO & mode information to the Log4OM2 application.

Log4OM2 works fine with my FT991A.

An suggestions as to how to get this fixed?

Thanks
Ravi

Hello, struggling on connecting Prosistel D controller to show antenna azimuth on Simons map. The controller is connected to PC via USB and creates port. The rest is unclear how to connect to the map. Have been using Yaesu rotator successfully...

Hi,

On SDR-Console V 3.3 when I try to select Hermes Lite 2 in the Search option, I am given the below option

-> Default
-> Extended
-> Fixed Address

But when I select the option of PlutoSDR in the search option,I do not find any of the options...

Hello,
I am using sdrconsole for the QO100 operation successfully.
I have linked my external radio and the SDR console shares the frequency information on 70cm to my rig.
On the SDR display I see the 10.489 frequency as it is used on the satellite....

I'm an old timer of 45 years on amateur radio so this stuff is new to me. I would like to know what I need to get my Kenwood TS-59SG and HackRF One SDR to work to decode FT8 and display the FT8 also what other software is needed to work FT8 on the...

Hi all, is it possible to have 2 identities on start up. One for hf and one for qo100? I tried this but when I switched to HF console still shows qo100 settings and visa versa.
I'm probably missing something obvious.
Regards Brent G5TV

Hello all.
Is it possible to run sdrconle with adalm pluto on TX and rtl sdr key for rx?

73's

First off, congratulations to the author(s) for an amazing piece of software. I am just exploring it after using SDR# for a while with various SDRs.

So here is my question: With the View->Maximum button I enable the yellow maximum curve in the...

Would a Propagation topic be useful for HF ?, or propagation results , or what is that shown on the sdrc screen .

Like for instance in the picture , see all those horizontal lines going up and down in frequency (mostly down) in the waterfall , the...

Bonjour;
J' utilise SDR Console V3.3 j' ai une déconnexion récurrente du logiciel . Je suis obligé de liquer sur start pour relancer SDR CONSOLE normal ?
merci
Richard

Hi All
Thanks for your help.
I've been trying for several days to configure SDR console with cw Skimmer with SDRplay1A without getting results.
The real problem is with the frequency sync between Cw skimmer and SDRconsole. As for the decoding of the...

Hello dear people,

I tried today to create a 1:1 copy from my stationary computer to my notebook in order to have exactly the same environment ready there.

Both devices run under exactly the same WIN10 22H2 and the current status and both devices...

The console is showing the spectrum with the odd spike but does not receive any signals on any frequency using sdr play or rtl sdr dongle.
there is audio noise and the squelch works in fact everything is ok but not receiving anything.
It worked ok...