It's all about the Software

New user as of today. Where do I go in v3.3 to change the audio output from default (speakers) to another destination? Also, is there a virtual cable that works well for connecting SDR Console to WSJT-x?
Many thanks for any responses!
Keith - ke4th

I greet everyone. I have the ts2000 connected to the sdr console via omnirigs, it works fine on the frequency changes. The connection is made via if 75925. and it goes to an rsp1a. as for the frequency, if I hear and see that they are talking, I...

I would like to use sdr-console to tune into narrowband signals acquired by a Casper SNAP board.

So I'm looking for documentation on a suitable IQ data stream that sdr-console recognizes. The SNAP is set up to easily stream UDP, so I'm looking for...

When I double click the program,the program will appear on taskmanager for 1 sec and then disappear.It means it only run for 1 sec and crush.It crush too fast to create the dump file.So I can't collect any dump files from taskmanager.
I used a...

I'm an old timer of 45 years on amateur radio so this stuff is new to me. I would like to know what I need to get my Kenwood TS-59SG and HackRF One SDR to work to decode FT8 and display the FT8 also what other software is needed to work FT8 on the...

Hi, I am trying to use SDRconsole as a panadaptor with my Kenwood TS-590SG. The rig control via Omnirig works successfully with SDRUno. With SDRConsole there have been a few times when it worked, but most often I get port busy . No clue why this is...

After reading the forum existing comments about non-starting, I made sure I have the latest API from SDRUno, and the latest DLL sdrsourcesdrplayv3.dll

The RSP2 is correctly identified by the software. However, start does not start the app. Help...

Hello,

I posted this, first, to the GroupsIO Forum before I realized that I should have
probably posted here instead. Sorry. Blame it on old age now.

Question:

Have an Icom R8600.
The program seems to capture the radio just fine, as the small...

In the options (...) dialogue, it would be nice to have mode button reordering.

Given the minimum DSP width, mode buttons could fit into 4 columns. Another user option?

A little wish, big effort? But asking anyway...

Hovering the mouse over spectrum or waterfall displays a vertical tuning bar with centre and bandwidth limits plus channelised tuned frequency.

An optional mode could be cross-hairs. Vertical to show...

can someone please help? sdr console finds rtl dongle but i have no signal,
in the select radio box under option it says tuner : unknown,
on the pc in the house everything works fine and under option in the select radio it says tuner: rafael micro...

I've started my Christmas Present List early this year. The latest item is for any generous SDR software developers out there...

Similar to a list of markers to show on the spectrum display: this is a set of frequencies to *hide*  from the display,...

hello, I installed yesterday sdr console in my laptop
everything works ok ,but I have a problem , that I had never befor:
every signal I hear and see in waterfall has a shadow on the same frequency, but its only optical,the stations they are sending...

Hi All, I use SDR Console and SDR plays duo's (by 3). I also use Icom RSBA-1 software to remotely access my IC-7300.
As my ISP uses GCNAT (all my connections are 5G) I created a VLAN using Tailscale to provide me easy access to my remote radio....

Hi

I am completely new to this forum, also to SDR Console.

I downloaded V3.3 and completed the installation. My HL2 was immediately recognised but on starting Console, no signals were received. Instead RF was immediately output on an unknown...

Greetings All
Two questions on the audio spectrum screen...
1) Is there anyway to get rid of the coloured fill to leave just the bare spectrum analyser trace ?
2) Is there anyway to change the vertical scale to bring the trace more in line with the...

Hello OM's

I use the SDR-Console V3.3 and my Waterfall screen is very bad.
Is this a bug problem?

My colour is Warbler and the Shading ist by 50% ... this are my best uses.

73, Christian OE5HCE

Just curious on what the SDR-Console trunking decoder can do.

Local systems:

Oklahoma City Metro Public Safety

Oklahoma Wireless Interoperability Network (OKWIN) (P25)

I already have DSDPlus Fastlane and SDRTrunk both work okay on both...

Hello,

Incredible program.
Thanks so much for making it available.
Can't begin to imagine all the work that has gone into it.

Will blame my ignorance on old age now.
A great excuse for most anything.

But, please bear with me a bit.
Haven't done...

The External Radio tracking (with Icon IC-7100) worked well for a few days.

But it recently has not been working. The ? screen shows Omnirig (Version 1.20) Not Responding.

I have 2 rigs selected on Omnirig:

Rig 1: IC-7100
Rig 2: IC-7100e4-DATA...

Hello,

Using the latest (I think) version.

Using with an Icom R8600

Tunes the radio just fine, and shows the ANT selected, and the tuned freq., from the program on the radio's display as it should.

But, cannot get it to show on the radio's...

I have Console connected to my IC-7100 as external radio and an RSPdx as the SDR receiver. I also have an MFJ-1708B SDR TX switch in circuit to use my 7100's antenna for transmit (only a 2 meter for now).

Most everything seems to work ok except I...