It's all about the Software

While my RTL-SDR v4 is working in SDRSharp, SDR++ and SDRAngel, it fails to work in SDR Console. It simply does not show anything and when I hit stop, the proces locks up. Tried v3.3 and v3.4 Beta. What did I do wrong?

Log
SDR Console tmp.txt...

I have two SDR-RTL v4 USB sticks and using SDR Console I see they are both same serial numbers RTLSDRBlog::Blog V4::00000001-1 I want to run both at same time so would I change that last number on one. To change serial number do I change last number...

Hi everyone !

I was wondering why the resolution is so poor in the home , calibration menu with my RTL-SDR v4 ?

SDR Console gives very precise resolution but when I change the PPM value from 0 to 2, nothing happend, then from 3 to 7 nothing...

Today I did install the newest beta version of sdr-console. until now I used the 3.3 build 2848. After installation I got no reception with my rtl dongle. I went back to the earlier version and all was ok. Do I missing something to install the...

I Have installed SDR Console V3 and use it with a simple usb dongle R820T based.

On 145.800 FMN i receive the same signal of 144.800 😓.

With other software (sdr Sharp an example) i don’t have this problem.

Can you help me ?

Alberto

Looking at the 'Getting Started with NESDR' web page, I see that SDR Console is not shown in their list of Compatible Windows Software.

Is this a terrible mistake by Nooelec Inc. (Canada) or should I be worried?

Angus

Hello forum community,

first of all please excuse my ugly english...

First of all, I would like to say that I have been using SWL for decades, but exclusively analog. For this I use devices from my collection, mostly FRG-7, FRG-7700, Jennen 9R-59...

2 SETUPS of RTL-SDR Dongle + Console V3.1/V3.2 stops working after WIN 10 update. Works perfectly with FunCube V1, V2

73
Michael Luft
4X1LM
milu111@gmail.com

Hi,

I use a Kenwood TS-870 and i am using the IF-Out on the rig that goes to my RTL-SDR V3 USB dongle
Omnirig is installed to controle the radio and everything is working very well.

The only thing i have is that on the 80 and 40 meter band...

Hello,

Using SDRsharp and SDR++ its possible use multiple RTLSDR and automatic numbering (0) (1) (2) (3)

How SDRC solving the problem to use multiple RTLSDR together in radio definitions like using T820 + E4000 tuners
Is there a trick for it to...

Hi,

SDRplay, Pluto, Airspy, RTL-SDR 820 + E4000 are working in SDR# so RTL is using the zadig correct

SDRplay, Pluto, Airspy are working in SDRconsole
RTL-SDR did work older SDRconsole version but some mysterious way not get analyser action any...

hello im having trouble with my nooelec sdr working with sdr console v3 the definitions are there but when i press play nothing happens it only happens with sdr console v3

Hallo
Ich bekomme das Teil einfach nicht zum Laufen! Habe schon verschiedene Software probiert. Sharp RDS läuft auch nicht!
Bei der RDS Console V3 bekomme ich immer Device Fehlermeldungen Uncompatibel Device Faild usw.
Kann mir evtl. hier jemand...

It seems some people are still interested in this thing. Google messed up the links. I posted the new link at rtl-sdr.com which seems to be the usual link. This is probably another good place to post the new link . The rtltool folder has rtltool in...

I installed SDR Console and most of the features appear to work except that I cannot adjust the bandwidth on FM broadcast channel and so get a very poor quality of reception. I installed the latest package for 64bit. I also have SDR# installed, and...

Hello
As you can see, I have installed SDRGlut and RtAudio.
I am using Raspberrry pi 4 and LimeSDR usb and have this problem, I cannot open SDRGlut. Can you help, please.
Software start -command?
Thank you very much in advance for your solution.

Can anyone help me please?
I have a nooelec NESDR Mini2+ R820T2 & DVB-T USB RTL-SDR which my PC recognises as a HID Infrared Receiver (?) that I am trying to use as the front end receiver for SDRplay.
The software sees the device and appears to...

Hallo, Ich verwende RTL-SDR 820T2 mit vorgeschaltetem Up- Converter und 6- Fach Bandfilter an einer FD4 Antenne

Das Problem ist, ich habe z.b. im 80m Band mehrere Stöhr quellen ca. 3 Khz breit (knarren und kratzen)
Ohne Antenne sind die Signale...

I am using my RSPDX in HDR mode but any time that I zoom in to part of the spectrum the console exits HDR mode. My workaround is to bring up a 'receiver pane' then I can use the +/- to zoom in.

Is this by design? I am a little unclear as to why I...