It's all about the Software

Not sure if what I am observing is a bug, behavior by design, or something I am missing.

A key point before I go on is that I am a laptop user without an external mouse or scroll wheel. I just have the laptop touch pad with left and right mouse...

Sometimes I use the analyser to look for MS pings on FM. I have noticed that there is a time mismatch between the time is listed in the analyser and what the time is in the IQ recording.

For example today I had a ping at 11:45:00 according to the...

Long term issue...I scan with the FM frequency changing every 5 seconds. When I am on a frequency (say 94.7) and no RDS is detected on the next frequency (94.9), the RDS from 94.7 is matched up with 94.9. How do I get it to start from scratch each...

Problem description
Using the calibration option in SDR-Console when using an RSP2Pro as the IF results in incorrect frequency adjustment
This is compounded when changing band (or Favourite ) as the calibration seems to get reset to zero.
The same...

Just installed the latest build 2685 and when I drag down the right bar I can only go about 3/4 of the way down before the time springs back to the start when I let go of the mouse button. I can use the mouse wheel over the waterfall to reach the...

If one adds a in the Quick Access Toolbar, the and all functions added after it disappear after closing and reopening SDR Console. Functions before the separator seem to stay. Not certain how far back in versions this behavior goes but it is a...

In the Audio Spectrum display when selecting the oscilloscope view, the audio is still unsymmetrical for AM mode (see circle in screenshot). The display is no longer centered evenly above/below zero as it used to be and is on all other modes.

Also,...

If you turn off the receive dsp panel and you tune up or down with the tranceiver you will go outside the screen. (screen is not refreshed, tunning bar outside the screen)

Here's a video of the rig external radio bug

SDRPLAY has updated the SDRUNO software to version 1.42-0720 and the API to version 3.10. When I start SDRConsole it doesn't recognize the RSP2Pro (other SDR software without problems). Please find a screenshot and logfile attatched:

The new NR4 is great. However if one switches mode, say between LSB and SAM, undesired noise artifacts that sound like garbled water appear. Almost the same sound as not enough smoothing applied.

As a workaround to fix it, all one needs to do is...

When receiving on QO100 and synchronising the frequency to the beacon, the frequency of the Digital Decoder window is not compensated. Consequently the Digital Decoder can be way off frequency to the received frequency.

Has anyone else noticed...

First reported a year ago but not addressed yet...

Bug report:

When recording a stereo FM station using the video recorder, the recorded audio is mono from the left channel and not stereo. Could this please be fixed?

Thank you so much. Loving...

Hi,

Since I'm now running beta version 3.2 build 2645 I hope it is OK to report this long outstanding issue as a beta bug:

I use SDR console as spectrum display / waterfall to monitor the QO100 NB passband and monitor my transmissions.
I don't use...

Hi, Simon.

Thank you for the reply to my report in the groups.io list.

I asked the question because I saw something beneath the AM Squelch item in the Squelch panel. Whatever it is, it lights up when you mouse over it, which led me to think that...

I'm sure I'm missing a setting (I think)

When I set the display to show UTC Time, the Schedule shows local time

Is there a setting to make the Schedule also show UTC time?

Thanks.

Clicking on the top of any Console window brings up the two way arrow but instead of resizing it moves the window, the same procedure on the left, right and bottom edges behave as expected resizing the window. Not a show stopper but I seem to always...

Hello,
After updating my 2 pcs to W10 21H2 build 19044.1566 and W11 21H2 build 22000.527 both SDR-Console 3.1 and also 3.0.27 no longer run. I get various problem like frozen screen upon starting, sometimes audio but no spectrum, can´t select radio,...

I´m new to this forum because it´s the first time I have problems. I can´t really figure out how it started but this is how it is now:
I´m using Win 11 21H2 build 22000.675
and two times RSP1A. First the RSP1A´s couldn´t started. Seems I had some...

Hardware:-
Hermes Lite 2 with firmware 72.8
Software:-
Windows 7 Home 32 bit
SDR Console compiled on 2022-04-12
Symptom:-
Maybe after one or two transmissions, on going to transmit, Hermes Lite relays chatter continuously, no transmit output. On...

Bug? The long path seem to be anchored on the opposite side of the earth from the home location.

Test setup, RX888 at 30m with a narrowband 500Khz bandpass filter inline, also without the filter the problem is present.

This is the spectrum on wspr waterfall, when using the bw setting of 2, 4 and 8 there is some inter modulation from what it...

Hardware: Hermes Lite 2 with Windows 7 32 bit computer
Software: SDR Console version 3.1 build 2320
Issue: Both sides of a conversation only get recorded if in the *** Options -> Hermes Lite window -> Tx Options -> Mute Rx check box is left...

Software: SDR console ver 3.1 build 2320
Hardware: Hermes-Lite 2, 32 bit Windows 7 computer
Problem: After keying the voice keyer and then cancelling it, the scroll wheel no longer fine tunes the radio frequency. However, left mouse will step change...

I used SDRConsole to snip a 10 second portion of an I-Q file recorded by SpectraVue.

However, the snipped file does not playback in SpectraVue - an error window pops up Input file not valid . The new snipped file does playback in SDRConsole.

Whit

I'm a huge SDR-Console fan. I BCBDX which means listening around the top of the hour. Over time the clock on my recording doesn't track the real recorded time but drifts behind. I have a ten hour recording and it's almost a minute behind after that...