It's all about the Software

Hi,

I am testing v. 3.3 version. So far not bad, but noticed that this version is little slow, for example setting frequency is little laggry, and noticed little clicks on sound... set buffer to x4 - thhis setting so far is the best... but still...

Hello,

Thanks for accepting me as a member.

I am having an issue with SDR Console 3.2 with the Waterfall and Spectrum skipping .
This only happens with one specific program called Wavenode which is a Wattmeter USB Device.
None of my other USB...

Hi
I'm not sure if this a a bug, glitch or operator error. I'm using a Yaesu 1200 with SRDPlay Dx and today I noticed my VFO knob no longer tracks in the SDR Console software. The radio is connected and tracking. I can move the mouse within the...

On V3.3 when I click the waterfall AUTO, or click and drag the adjust slider, the audio pops and cuts out while I'm adjusting. Also the audio will pop or cut out on occasion.
I'm running console on a Windows 10 pro, 3.4 GHz processor, 32 GB ram. I'm...

SDR Console 3.3 Build 2848 will crash (at least for me) if there is an attempt to right click on an open area of the toolbar. Since nobody else has posted a report about this, I am not sure if this behavior is unique to me or not. I am able to repro...

Hello!
I have a little problem SDR Console 3.2 and above Server not send data to client using RX-888 mk II
I have a computer. To this computer connect a few receivers. On this computer running SDR Console Server. On other computer running SDR...

Hello! SDR-Console is working *splendidly* for me, with one small exception: the waterfall display is a little bit jittery no matter what I try. First, some details:

Software Version: 2022-09-18_1224.exe
SDR: SDRPlay RSP1A
Machine: old-ish i7-6700T...

Does anyone know whether or not it is expected behavior for Favorites to not work correctly if the DSP Panel is not displayed when switching between Favorites?

The trouble I am observing is if the DSP Panel is not displayed and I switch between one...

Hi, i´m using SDR Radio now for several Years an im very happy with it.
(donatet too)
But when i use the mousewheel to tune often the mode switches to another mode, i.e. usb to lsb.
Is this a bug or a feature?
I can´t find where i can switch it of....

I'm running the latest SDR Console release on Windows 10 21H1 Home (my system has never offered to update past that version for some unknown reason). Hardware is a Core i5-3570K at default clocks, EVGA GTX 960 at default settings and latest...

I’m working on C# code that sends commands to SDR-Console. One of my tasks is to identify the current Mode in SDR-Console. If I select “BC-FM” in Console and send the “MD;” CAT command from my software, I expect to get “MD9;” in return as documented...

New user, have SDRPlay connected to Rcv Out on my IC-7600, nothing connected to Recv In, so using Console for spectrum and audio. I got it working yesterday, but now it won't connect or play anything from SDRPlay. Long story, after I had Console...

I am doing a new post on this because it seems to be a separate issue from the Favorites issue I posted earlier though the Favorites issue is being impacted by this issue.

If you close the DSP Panel in a docked state and then close SDR Console, the...

Not sure if this has been spotted before - on each memory bank if you edit the 3rd memory button there is an extra option labelled Apply . It doesn't do anything though.

Same on 2 pc's. No big deal as it's benign ;)
Capture.JPG

73 John

Hi,

I notice a bug with RFspace SDR-IQ, it was tested with 2 different SDR-IQ, same result.
There is always a strong carrier on the center of spectrum:
I attached 2 screenshot where i swap the center FRQ between 1.850 and 1.875.

73
Pat
ON4AMI /...

Hi Simon,

When opening multiple sequential files that were recorded in SDRuno and editing them with the Datafile Editor, the final edited file is jumping unexpectedly when playing the edited wav file back in SDR Console v3.2. I suspect it could be...

Running a IC7300 with an internal PTRX-7300 panadapter connected to an RSP1A SDR.

I have two RSP1A's and at SDR Console startup I select whichever I want to use. 99% of the time it's the RSP1A connected to the panadapter inside the 7300.

On...

Hi I am using an RSP1A and a Yaesu FTDX-5000 on start up I can see the radio is is tracking with the vfo and the digital display. I can select the radio the RSP1A and click start. However the Start button on the upper left does not start the...

SDR-Concole v3.2
Windows 10 22H2 build 19045.2251
Windows Feature Experience Pack 120.2212.4180.0
Hardware: AMD FX(tm)-8350 Eight-Core Processor 4.01 GHz
Graphics Card: NVIDIA GeForce GTX 750Ti - Driver version 526.98 released 20221116 (this was...

Just wondering where do I send a crash report?

I have attached the report here anyway. Never mind it's too large.

To recreate the bug for RSP1A users (and possibly other radios where there is a latency setting option), do the following:

1. Start SDR Console and change bandwidth to anywhere between 6 MHz and 10 MHz.
2. Change latency to “Highest” (in Radio...

Hello,
I may be making a mistake.
The filter bandwidth is displayed at odd setting for example 2,5khz with 2,488 Hz.at even setting for example 5khz is also displayed 5 khz. Is this a bug or am I making a mistake in the settings?
vy 73 George Hz.jpg

Hi Simon. Using Win 11 and Console 3.2 on an i5-10 machine with Nvidia GTX 1650 super.
Trying to use my Pluto for Tx/Rx through QO-100.
Radio definitions - highlight Pluto - tick Converter selection and press edit.
In Converter definition page -...

My PC is a HP laptop i7-1165G7 with 16 GB RAM and CUDA GPU.
I have recently updated my PC to Win 11 22H2 build 22621.674.
I have installed SDR Console v3.2 and I noticed an annoying clicking on the audio background.
I tried to revert back to v3.1,...

I upgraded from 32 bit Windows 7 to 64 bit Windows 10 in the summer. I can still boot up either. My hardware is:-
I7 desktop with old GeForce GT 450 dual monitor gpu. Hermes Lite 2 driving an XPA125B 100W linear. My recording tests today off Hack...