It's all about the Software

Hi
I am noticing an issue with this version while adjusting the waterfall contrast/brightness.
While I am moving the brightness bar, a noise us generated on the waterfall along with a static sound noise. That happens with more intensity if the...

Weird one this...

If I start SDRC with the AGC panel visible, then the splash screen stays up indefinitely while the task sits burning CPU (see screenshot). Note, the radio (an SDRplay RSP2) has not been started. The splash screen does go away when...

I am running v3.3 build 2949 (April 24 2023, 05.45.01) and every time I select a Favourite on 432MHz (GB3UHF) the Console crashes.
I give up waiting after 20 minutes of the application telling me to wait so a crash dump is highly unlikely

Even...

While using the Airspy on Super Station #1, I get a rapid pulsing (ticking) sound when RXing a signal thats not near the center of bandscope. This occurs ONLY when operating at bandwidth of 384 thru 912 kHz . Happens on two different client laptops....

Hi,

I'd like to report what appears to be a minor bug in the Scheduler Recording dialog window.

When creating a new scheduler definition, the list of events does not populate until I mess with the Title text box. Before messing with the Title box,...

Hi!

I recently came across this wonderful piece of software and have been playing around with it since then. The CUDa processing intrigues me a lot and I decided to see what bandwidth my computer is able to handle when using my LimeSDR USB...

Hello.
SDR Console v3.3 2949
Using sh script in console on pluto+:

Who to believe?

2023-05-05_18-25-36.png

Hi,

nothing important, just a quick note that the installer offers this:

3-3-Build-2949-installer-close-console.png

I recently started seeing that the waterfall displays only a continous series of dashes no matter what type of signal I have tuned. Additionall, the S-meter level for the signal remains the same, yet I can hear the signal clearly as transmitted....

I'd suggest the following corrections to improve the clarity and tone of the text:

I wanted to share with everyone a workaround that I discovered to avoid SDR Console freezing when changing bands with External Radio enabled. It seems that too much...

Match to 3v3b2870

- Options / USB Relay:
> Both links to www.dcttech.com and www.Ucreatefun.com are gone. The sides don't longer exist
If you use HID usb Relay at ebay there are some 1/2/4/8x but I don't know if they work here.
> HELP link...

im using a RTL SDR v3 , this happens when i use the right button of my mouse to move around the frequency or when i click on the center button, and no, this is not a dc spike, this thing its jumping .

This evening I wanted to record a few hours of LRA36 on 15476, so I pointed SDR Console 3.2 at my Airspy, set the bandwidth to 192 kHz, and started recording. Reception was very good for the first hour and a half, then started to fade. After 3 hours...

Hello!
I have a little problem SDR Console 3.2 and above Server not send data to client using RX-888 mk II
I have a computer. To this computer connect a few receivers. On this computer running SDR Console Server. On other computer running SDR...

Hi,

Hi, I use SDR Console as panadapter for IF K3+FCD+. Working fine but randomly accidentally stops meter to show a real value. After some time he shows again. This is repeated accidentally. Screenshot-2023-03-07-193823.jpeg

Dear,

A setup is made with an AOR-AR8600 with 10.7MHz IF Out connected to an RTL-SDR.
The AR8600 is setup as external radio with Rigctl
The RTL-SDR is radio 1
In External Radio options, SDR frequency selection, the IF output with an offset of...

Radio G33DDC with V. 3.3 B2870 Win10 64 most recent MS build.

The console defaults to NR3 on first install, selecting any other NR# ( noise reduction ) or ( turning it OFF) attenuates the audio to a very low unusable level. Selecting NR3...

Hello.

I'm running SDR Console version 3.3 build 2870 (64 bit) on Windows 10.
When moving the mouse over Mode or Filter buttons the labels names changes ramdomly. For example, moving the mouse over Mode ... button its label changes to CW-U and...

May not be a bug but an observation.
SDR Play RSPDX, Virtual audio (Voicemeeter Potato)

The filters appear to leak for lack of another word. Example with a 4khz default filter applied, the audio is roughly 100-4000, however there is a spike...

Hi,

I am testing v. 3.3 version. So far not bad, but noticed that this version is little slow, for example setting frequency is little laggry, and noticed little clicks on sound... set buffer to x4 - thhis setting so far is the best... but still...

Hello,

Thanks for accepting me as a member.

I am having an issue with SDR Console 3.2 with the Waterfall and Spectrum skipping .
This only happens with one specific program called Wavenode which is a Wattmeter USB Device.
None of my other USB...

Hi
I'm not sure if this a a bug, glitch or operator error. I'm using a Yaesu 1200 with SRDPlay Dx and today I noticed my VFO knob no longer tracks in the SDR Console software. The radio is connected and tracking. I can move the mouse within the...

On V3.3 when I click the waterfall AUTO, or click and drag the adjust slider, the audio pops and cuts out while I'm adjusting. Also the audio will pop or cut out on occasion.
I'm running console on a Windows 10 pro, 3.4 GHz processor, 32 GB ram. I'm...

SDR Console 3.3 Build 2848 will crash (at least for me) if there is an attempt to right click on an open area of the toolbar. Since nobody else has posted a report about this, I am not sure if this behavior is unique to me or not. I am able to repro...

Hello! SDR-Console is working *splendidly* for me, with one small exception: the waterfall display is a little bit jittery no matter what I try. First, some details:

Software Version: 2022-09-18_1224.exe
SDR: SDRPlay RSP1A
Machine: old-ish i7-6700T...