It's all about the Software

Hi,

I have been having lockups using Build 3131 on 3 separate computers, one is a 9th Generation Intel Core i9 Processor i9-9880H, NVIDIA GeForce GTX 1650 and 2 are 12th Gen Intel(R) Core(TM) i7-12650H with Intel® UHD Graphics, and all have 64gb of...

Hello,
I am trying to launch the Server Manager on a fresh install. I am on build 2848 and had the same issue with the Release build.

When I click the button to launch I see the process start in Task Manager but the UI never launches.

Any ideas...

hello new here im having issues with the rtl-sdr v4 i just got home a fewdays ago all programs i try sdr#, sdr++ and sdr console shift the local fm stations for an example 106.3 is located at 56.3mhz sdr# had a shift frequency option wher i can...

Hello again! I have another report which happens occasionally when I have the SDR console unfocused and behind other windows, but not minimized. After some length of time (usually long) I return to the console and find that a lot of the widgets have...

Hello all!

Silent installation/automated deployment of the current SDR-Radio does not seem to be possible because it looks like that its installer always displays this info message:

vcredist.png

It happens even if the actual 64-bit vcredist...

I have 3 ADALM Pluto sdr's all set up using IP addresses. It does not matter which one I select, it only uses the first one in the list.

I now have a second SDRPlay RSP receiver. The RSPduo sits alongside the RSP2 and the venerable Perseus.
It seems that with Build 3131 I can't have both RSPs connected to their respective ports at the same time as SDRC fails to detect either when...

Hello!

I have been using SDR Console for about a year for VHF use with transverters with a Hermes Lite 2. I recently purchased a second HL2 so that I don't have to swap cables to switch between 222mhz and 144mhz.
I used the second identity which...

Hi all,

I am experiencing problems with audio device detection as well as some issue with the tone function.

My pc (dedicated to operating QO-100 satellite) was working in May, since then it was switched off until the past weekend. I tried to...

Hi!

the frequency range on the RX888 is tricky. SDRconsole swithced too early from the HF port to the VHF port. When the center marker of the band width selector hits 16Mhz the VHF is choosen.
As the RX888 can run the HF until 30 Mhz, this is far...

between a few Betas ago and Sept. 16, my unchanged hardware setup no longer is able to detect or use the RX888 Mk II.

log files seem interesting in that the RX888 is responding to probes and the responses look successful.
the unit serial number...

I recently installed SDR Console after running a few other SDR packages, and connected up my RTL SDR Dongle. Selecting the RTL SDR as the radio with a bandwidth of 2.4 MHz, and pressing start I get - Nothing. No audio, no visual dospalys, just the...

I have not been able to get the LimeRFE to work above 100 MHz with SDRConsole. What I have found is the logic levels on U9 (SW6_V2 & SW6_V3) are not correct at 222 MHz. As such it can not receive or transmit on J3 at 222 MHz. SW6_V2 has to be a 1...

Hello,
I detected a bug, when changing TX filter setting e.g. from 2k7 to 2k9 for some testing...
If I want to change it back from 2k9 to 2k7, the TX settings still using the increased bandwidth settings.

This problem happens for all version of...

First a big thank you to Simon for fixing NR4! While I had a workaround for this using Favorites, it is still VERY NICE to now switch modes and not have NR4 warble. I've been testing this fix and find no issues and frankly it makes shortwave...

Using the latest Beta release and have noticed something odd - this may be a new 'feature', but it feels more like a bug. When scrolling frequency steps in the 'Receive' window, the main display is not updating/refreshing. There are ways to resolve...

I am using the lastest version of SDR Console with the new noise blanking software, thanks Simon.
I have noticed a problem with the RIT adjustment, when I change the offset frquency the whole box jumps up or moves. It is really difficult to adjust...

Weird one this...

If I start SDRC with the AGC panel visible, then the splash screen stays up indefinitely while the task sits burning CPU (see screenshot). Note, the radio (an SDRplay RSP2) has not been started. The splash screen does go away when...

I am running v3.3 build 2949 (April 24 2023, 05.45.01) and every time I select a Favourite on 432MHz (GB3UHF) the Console crashes.
I give up waiting after 20 minutes of the application telling me to wait so a crash dump is highly unlikely

Even...

Hi
I am noticing an issue with this version while adjusting the waterfall contrast/brightness.
While I am moving the brightness bar, a noise us generated on the waterfall along with a static sound noise. That happens with more intensity if the...

Good Day. Using either of the latest two BETA versions ... I cannot access a full size maximized window up on starting the application. It starts, and I hear the radio - but I cannot resize the window to anything other than a mini preview size...

I would like to report that sound on the following configuration doeas not work properly.
The issue seems to be a decoding, clipping issue as the sound is heavily distoreted under certain circumstance.

Configuration: Windows 11, ASIO sound output...

My PC is a HP laptop i7-1165G7 with 16 GB RAM and CUDA GPU.
I have recently updated my PC to Win 11 22H2 build 22621.674.
I have installed SDR Console v3.2 and I noticed an annoying clicking on the audio background.
I tried to revert back to v3.1,...

This is really a minor issue, but in my list of radios available to the public, the Afedri LAN-IQ is listed as having a frequency range of 0 to 30 MHz, when in fact it has a range of 0 to 1700 MHz.
Screenshot 2023-08-05 124047.jpg
Thanks,
Dominic...

Using SDR receiver RSP Duo ...

Invoking version 3.2 today and saw that the RF-spectrum and waterfall display cannot be made visible.
Frequency display and audio spectrum (small window) is working. I can hear communications
without any problem....