starting with the Elad-Duo

Moderator: NN4F

on2ron
Posts: 56
Joined: Thu Aug 06, 2020 4:14 pm

starting with the Elad-Duo

#1

Unread post by on2ron »

I got the chance to buy an Elad-duo. After reading the sdr-radio website, it is still not clear what I could use to activate the PTT with a down to earth simple setup. Any suggestions?

73' Ron
ON2RON

User avatar
Simon G4ELI
Posts: 2134
Joined: Thu Aug 06, 2020 7:27 am
Location: Mawnan Smith
Contact:

Re: starting with the Elad-Duo

#2

Unread post by Simon G4ELI »

Vox, press [TX], etc.?

I think you can connect a footswitch but I have forgotten.

I use the DUO a lot on HF and to drive transverters, so if you get stuck just shout. It's a superb radio.
Simon Brown :shock:
www.sdr-radio.com

Do not send me direct e-mail, thank-you!

Max
Posts: 853
Joined: Thu Aug 13, 2020 9:47 am

Re: starting with the Elad-Duo

#3

Unread post by Max »

From Elad Duo section:
https://www.sdr-radio.com/elad-transcei ... figuration

PTT
PTT using a foot switch connected to the DUO is not supported, remember the DUO is under computer control. If you want foot switch / external PTT support see:

https://www.sdr-radio.com/ptt

Hope it helps?

73

Max

on2ron
Posts: 56
Joined: Thu Aug 06, 2020 4:14 pm

Re: starting with the Elad-Duo

#4

Unread post by on2ron »

I do have a foot switch and I will see how to implement it. In the meantime, I will use the software PTT. Now I go and shop for a nice sounding usb microphone. I did consult the sdr-radio.com/ptt page and find it and it seems not easy to implement a circuit to get things done.

Any tips for a good quality microphone with a decent boom arm. I hate running any more curly wires over my desk like hand microphones do.

Simon, I remember you mentioned a TONOR microphone back in the day's. Is it a good thing using a USB model?

73' Ron

User avatar
Simon G4ELI
Posts: 2134
Joined: Thu Aug 06, 2020 7:27 am
Location: Mawnan Smith
Contact:

Re: starting with the Elad-Duo

#5

Unread post by Simon G4ELI »

Ron,

I use microphones connected to the PC, I really like the Sennheiser 835. You'll need the right cable, I can also recommend this USB soundcard.
Simon Brown :shock:
www.sdr-radio.com

Do not send me direct e-mail, thank-you!

on2ron
Posts: 56
Joined: Thu Aug 06, 2020 4:14 pm

Re: starting with the Elad-Duo

#6

Unread post by on2ron »

Thanks, Simon. Yes, I can also walk this path. I have a Steinberg UR12 with a low-cost microphone and see what's happening. The PTT of the console does its job OK.

Cheers, Ron

jdow
Posts: 798
Joined: Mon Aug 10, 2020 8:17 pm

Re: starting with the Elad-Duo

#7

Unread post by jdow »

I wonder if I might suggest to Simon MIDI PTT?

{^_^}

on2ron
Posts: 56
Joined: Thu Aug 06, 2020 4:14 pm

Re: starting with the Elad-Duo

#8

Unread post by on2ron »

Simon,

Seems the PWR output of the DUO is very low (1W) when set on MAX, even with the two-tone transmit test. The PWR scale shows a possible maximum of 3W. In the video you made, this PWR scale is 10W. Did I make a bad setting in the console?

73' Ron

User avatar
Simon G4ELI
Posts: 2134
Joined: Thu Aug 06, 2020 7:27 am
Location: Mawnan Smith
Contact:

Re: starting with the Elad-Duo

#9

Unread post by Simon G4ELI »

on2ron wrote: Mon Sep 20, 2021 3:32 pm Simon,

Seems the PWR output of the DUO is very low (1W) when set on MAX, even with the two-tone transmit test. The PWR scale shows a possible maximum of 3W. In the video you made, this PWR scale is 10W. Did I make a bad setting in the console?

73' Ron
Ron,

Please - why must I always ask for screenshots? How else do I know what you're doing?
Simon Brown :shock:
www.sdr-radio.com

Do not send me direct e-mail, thank-you!

on2ron
Posts: 56
Joined: Thu Aug 06, 2020 4:14 pm

Re: starting with the Elad-Duo

#10

Unread post by on2ron »

Simon, I posted the screenshot in the IO group as I do not see how to do this here.

73' Ron

Post Reply