USRP1

ron
Posts: 3
Joined: Sun Oct 25, 2020 5:19 am

USRP1

#1

Unread post by ron »

hello,
Can the USRP1 operate with the SDR CONSOLE software.
thx

User avatar
Simon G4ELI
Posts: 2134
Joined: Thu Aug 06, 2020 7:27 am
Location: Mawnan Smith
Contact:

Re: USRP1

#2

Unread post by Simon G4ELI »

Have you tried it? I think it should work.
Simon Brown :shock:
www.sdr-radio.com

Do not send me direct e-mail, thank-you!

ron
Posts: 3
Joined: Sun Oct 25, 2020 5:19 am

Re: USRP1

#3

Unread post by ron »

Hello
thx for the response.
Yes , i tried it but it didn't work.
The driver for the usrp1 is installed en recognized.
In de software SDR Console i see the USRP as lan and not USB port, that can't work.
I can't change that in the software.

ve3aam
Posts: 6
Joined: Thu Dec 03, 2020 3:51 pm

Re: USRP1

#4

Unread post by ve3aam »

Totally operational! I've been using one for many months..Could possibly be that the UHD files are out of date? or that the device does not have the FPGA firmware. Best to use a Linux OS to confirm and to install the FPGA...Way to much trouble to do so in Windows...Information of course can be found on the Ettus website for assistance.
Best of luck
Dale
ve3aam

ron
Posts: 3
Joined: Sun Oct 25, 2020 5:19 am

Re: USRP1

#5

Unread post by ron »

[hello,
What must I upgrade to work with SDR console software.
mvg
ron
Attachments
IMG_2768.JPG
IMG_2771.JPG
IMG_2770.JPG
IMG_2769.JPG

User avatar
mbott
Posts: 111
Joined: Sat Aug 08, 2020 10:48 am
Location: Westerville, Ohio EN80nd
Contact:

Re: USRP1

#6

Unread post by mbott »

It looks to me that you are running Linux? Is that correct? SDR Console is a Windows program.
--
Mike

User avatar
PD3LK
Posts: 517
Joined: Thu Aug 06, 2020 10:36 am

Re: USRP1

#7

Unread post by PD3LK »

mbott wrote: Tue Dec 15, 2020 11:15 pm It looks to me that you are running Linux? Is that correct? SDR Console is a Windows program.
read from the start ;)

User avatar
mbott
Posts: 111
Joined: Sat Aug 08, 2020 10:48 am
Location: Westerville, Ohio EN80nd
Contact:

Re: USRP1

#8

Unread post by mbott »

PD3LK wrote: Tue Dec 15, 2020 11:24 pm
read from the start ;)
I asked because I'm not familiar with the USRP1.
--
Mike

User avatar
PD3LK
Posts: 517
Joined: Thu Aug 06, 2020 10:36 am

Re: USRP1

#9

Unread post by PD3LK »

mbott wrote: Tue Dec 15, 2020 11:27 pm
PD3LK wrote: Tue Dec 15, 2020 11:24 pm
read from the start ;)
I asked because I'm not familiar with the USRP1.
he want to update his USRP1 (best to do this in Linux) so it can communicate with SDRC

User avatar
mbott
Posts: 111
Joined: Sat Aug 08, 2020 10:48 am
Location: Westerville, Ohio EN80nd
Contact:

Re: USRP1

#10

Unread post by mbott »

PD3LK wrote: Tue Dec 15, 2020 11:31 pm he want to update his USRP1 (best to do this in Linux) so it can communicate with SDRC
OK, got it.
--
Mike

Post Reply