It's all about the Software

hello,
Can the USRP1 operate with the SDR CONSOLE software.
thx

Have you tried it? I think it should work.

Hello
thx for the response.
Yes , i tried it but it didn't work.
The driver for the usrp1 is installed en recognized.
In de software SDR Console i see the USRP as lan and not USB port, that can't work.
I can't change that in the software.

Totally operational! I've been using one for many months..Could possibly be that the UHD files are out of date? or that the device does not have the FPGA firmware. Best to use a Linux OS to confirm and to install the FPGA...Way to much trouble to do so in Windows...Information of course can be found on the Ettus website for assistance.
Best of luck
Dale
ve3aam

[hello,
What must I upgrade to work with SDR console software.
mvg
ron

It looks to me that you are running Linux? Is that correct? SDR Console is a Windows program.

mbott wrote: ↑Tue Dec 15, 2020 11:15 pm It looks to me that you are running Linux? Is that correct? SDR Console is a Windows program.

read from the start

PD3LK wrote: ↑Tue Dec 15, 2020 11:24 pm
read from the start

I asked because I'm not familiar with the USRP1.

mbott wrote: ↑Tue Dec 15, 2020 11:27 pm

PD3LK wrote: ↑Tue Dec 15, 2020 11:24 pm
read from the start

I asked because I'm not familiar with the USRP1.

he want to update his USRP1 (best to do this in Linux) so it can communicate with SDRC

PD3LK wrote: ↑Tue Dec 15, 2020 11:31 pm he want to update his USRP1 (best to do this in Linux) so it can communicate with SDRC

OK, got it.