Read frequency via serial port

colibri
Posts: 1
Joined: Thu Apr 27, 2023 2:45 pm

Read frequency via serial port

#1

Unread post by colibri »

I would like to read the set frequency on console via arduino.
In options, cat (serial port), I/O Test, I set the port and sent the frequency, arduino reads it correctly.
After I go to port selection I set the port as I/O Test, but nothing happens, it seems that console doesn't send any data.

I go to I/O monitor and click start and nothing comes out.
It's normal I did something wrong
Thank you

Post Reply