I Have the mute function set for strong signals, however I do not believe it is working correctly or there is an operator error. I have the RSP1A and a Yaesu FT1000MP with the pandadpter board installed. When I transmit I get the huge signal and lots of feedback from the speakers. Is there a way to kill the receiver or mute it when I transmit.
Thank You
Chuck N5ANY
Mute PC/SDR
- Simon G4ELI
- Posts: 2134
- Joined: Thu Aug 06, 2020 7:27 am
- Location: Mawnan Smith
- Contact:
Re: Mute PC/SDR
Hi,
Screenshots always help. Wideband DSP is the easy way to do this:
Ribbon Bar, Home, Wideband DSP, Auto-mute.
Screenshots always help. Wideband DSP is the easy way to do this:
Ribbon Bar, Home, Wideband DSP, Auto-mute.
Re: Mute PC/SDR
That helped a little I still get a lot of feed back and through the PC.
- Simon G4ELI
- Posts: 2134
- Joined: Thu Aug 06, 2020 7:27 am
- Location: Mawnan Smith
- Contact:
Re: Mute PC/SDR
When you get feedback has the waterfall stopped displaying data? If so this is audio getting into the cabling. Please post a screenshot so I can be sure you have the Mute working.
Re: Mute PC/SDR
This was corrected in the latest release.
- Simon G4ELI
- Posts: 2134
- Joined: Thu Aug 06, 2020 7:27 am
- Location: Mawnan Smith
- Contact: