Click Tuning is Strange in MW and Below
Click Tuning is Strange in MW and Below
Tuning via click tuning behaves strangely in MW and below. The attached video illustrates this. SDRC 3.0.25 on an Elad FDM-S2.
- Attachments
-
- SDR Console 2020-10-29 18h 07m 59s.mp4
- (97.42 MiB) Downloaded 54 times
Re: Click Tuning is Strange in MW and Below
What's the problem? I can't see one.
Martin
m3ghe
IO92sc
G-QRP club 6129
Use my online radios http://remoteradio.myddns.me/ or http://remoteradio.changeip.org/
m3ghe
IO92sc
G-QRP club 6129
Use my online radios http://remoteradio.myddns.me/ or http://remoteradio.changeip.org/
Re: Click Tuning is Strange in MW and Below
The problem is that the tuning doesn't track where I click. Watch the green tuning indicator when I click. It appears in a place other than where I click.
For example, when I enter "170" on the keyboard to tune to 170 kHz, I see AM broadcast stations offset from where they should be. The first one, at 840 kHz on the display, is actually at 560 kHz. Note that when I click on the signal at 840 kHz, the green band that indicates where I'm tuned actually appears at 560 kHz.
For example, when I enter "170" on the keyboard to tune to 170 kHz, I see AM broadcast stations offset from where they should be. The first one, at 840 kHz on the display, is actually at 560 kHz. Note that when I click on the signal at 840 kHz, the green band that indicates where I'm tuned actually appears at 560 kHz.
Re: Click Tuning is Strange in MW and Below
None of the screen capture tools I have will let me capture that, including the screenshot tool built into SDRC (the "Step" dropdown closes as soon as I try to take a screenshot), but mine looks identical to yours--"Snap" and "1 kHz" are checked.
It appears this issue happens whenever the span is set to a higher value than the tuned frequency. For example, if the span is set to +/- 700 kHz and I use keyboard entry to tune to 170 kHz.
It appears this issue happens whenever the span is set to a higher value than the tuned frequency. For example, if the span is set to +/- 700 kHz and I use keyboard entry to tune to 170 kHz.
Re: Click Tuning is Strange in MW and Below
1. open that window (pane) and push the PRTSCR-Sys key on your keyboard
2. open Windows Paint
3. press CTRL + V keys
4. use Select and Cut to select only the SDRC window containing the pane (in case you have 2 or more sreens)
5. save pic as "xxxx.png"
6. attach the pic here by using the button "Full Editor & Preview"
PS Don't make Simon angry, always send the full SDRC screen (don't crop or cut parts and leave it high res)
2. open Windows Paint
3. press CTRL + V keys
4. use Select and Cut to select only the SDRC window containing the pane (in case you have 2 or more sreens)
5. save pic as "xxxx.png"
6. attach the pic here by using the button "Full Editor & Preview"
PS Don't make Simon angry, always send the full SDRC screen (don't crop or cut parts and leave it high res)
Re: Click Tuning is Strange in MW and Below
i see what you mean, have to leave this to other S2 users or Simon...