Scale - High/Low - per band?

G4DRS
Posts: 28
Joined: Wed Sep 16, 2020 9:28 am

Scale - High/Low - per band?

#1

Unread post by G4DRS »

Is it possible to have the scale settings ( the Low and High sliders that pop up when you hover over the top right of the spectrum pane) changes according to the band in use?
I have the RSP1A tuned to the 9MHz IF of my transceiver, with the frequency display showing the frequency the transceiver is tuned to.
I find I need to mess with the Low scale as I change bands on the transceiver. It would be nice if these settings could be saved and automatically recalled based on the frequency of the transceiver.
I would not be at all surprised to find that it is possible, but I simply haven't figured it out yet.

73
John
G4DRS

Barry WB2ZXJ
Posts: 32
Joined: Mon Aug 10, 2020 11:50 pm

Re: Scale - High/Low - per band?

#2

Unread post by Barry WB2ZXJ »

Hi John,

If you have created a Favorite for each band, you can save the range and levels for each by checking the appropriate box (see attached).

Barry
WB2ZXJ
Attachments
Favourites1.jpg

G4DRS
Posts: 28
Joined: Wed Sep 16, 2020 9:28 am

Re: Scale - High/Low - per band?

#3

Unread post by G4DRS »

Thanks, Barry.
I was hoping it would be automatic.
The SDR is just a display for me, I don't interact with it any more than I have to.


John
G4DRS

User avatar
PD3LK
Posts: 517
Joined: Thu Aug 06, 2020 10:36 am

Re: Scale - High/Low - per band?

#4

Unread post by PD3LK »

Hi, you can set the High Setting on automatic: tab View, Scale button: High: Auto
Unfortunately Low can not be set to Auto.

Post Reply