Server bandwith

malimaster
Posts: 2
Joined: Sun Feb 28, 2021 1:46 am

Server bandwith

#1

Unread post by malimaster »

Hi @ all,
i installed the Server Manager and there is a limitation to 1 mhz. Is there a possibility to change it to 2 mhz in a config file oder something like this?

Manuel

garamus
Posts: 3
Joined: Wed Mar 24, 2021 1:53 pm
Location: Oklahoma

Re: Server bandwith

#2

Unread post by garamus »

Hello, I am also having this issue. I have a server setup thru a lan network. i use a HackRF. When i connect locally i can get 20mhz of bandwidth, but when i connect to the server i can only get 250khz of bandwidth. How do I get more?
If i use my rtl2832 on the server I can get 2.4mhz of bandwidth.

User avatar
Simon G4ELI
Posts: 2134
Joined: Thu Aug 06, 2020 7:27 am
Location: Mawnan Smith
Contact:

Re: Server bandwith

#3

Unread post by Simon G4ELI »

See attachment.
Attachments
Like this
Like this
Simon Brown :shock:
www.sdr-radio.com

Do not send me direct e-mail, thank-you!

garamus
Posts: 3
Joined: Wed Mar 24, 2021 1:53 pm
Location: Oklahoma

Re: Server bandwith

#4

Unread post by garamus »

I have worked with the bandwidth settings and I can only make the bandwidth smaller. I have ticked compression on and off. 250khz is as high as I can get it.
I did notice that I had to restart after each change. Any idea what Im doing wrong???
As i said before, my rtl2832 will allow 2.4mhz bandwidth.
Could this be a definition issue??
Attachments
sdrpng.png

malimaster
Posts: 2
Joined: Sun Feb 28, 2021 1:46 am

Re: Server bandwith

#5

Unread post by malimaster »

Same by my configuration: 1 mHz is the max setting.

magesticmage
Posts: 1
Joined: Sat Jul 10, 2021 1:22 am

Re: Server bandwith

#6

Unread post by magesticmage »

I too have this problem, cant get over 1Mhz even though i set it higher in the server

i noticed this after installing the latest version SDR-Radio V3.0.28, 64-bit, 2021-06-30_1859

see attchedments

what is "Low IF" mean?
Attachments
2.jpg
1.jpg

Post Reply