Shaded, Resolution, Solar

🙋 If you want a new feature or a change to the software then add your request here.

If it's not here then it's not going to happen.
BM46
Posts: 97
Joined: Fri Aug 21, 2020 9:07 am
Location: LOT, 46, France

Shaded, Resolution, Solar

#1

Unread post by BM46 »

Special Points Requests

Shaded = For some time this parameter must be reset each time the program is opened. He didn't need it before.

Resolution = The same is true for the value of the chosen resolution, each time the program is opened, the value must be chosen again.
Too bad to have to reset these two parameters each time you open the program
These parameters should normally be recognized at each opening.

Another point.
Like the choice to display or not: Clock, Statistics, Frequency
have the possibility to display in addition the parameters: Solar Flux, Regions, Sunspots and A, K

Thank you in advance

Best regards

User avatar
Simon G4ELI
Posts: 2134
Joined: Thu Aug 06, 2020 7:27 am
Location: Mawnan Smith
Contact:

Re: Shaded, Resolution, Solar

#2

Unread post by Simon G4ELI »

  • What version are you using? Get the latest kit please.
  • Ribbon Bar, View, Waterfall Extras.
Simon Brown :shock:
www.sdr-radio.com

Do not send me direct e-mail, thank-you!

BM46
Posts: 97
Joined: Fri Aug 21, 2020 9:07 am
Location: LOT, 46, France

Re: Shaded, Resolution, Solar

#3

Unread post by BM46 »

ELAD FDM-S3 = Version 3.1 Build 2385

BM46
Posts: 97
Joined: Fri Aug 21, 2020 9:07 am
Location: LOT, 46, France

Re: Shaded, Resolution, Solar

#4

Unread post by BM46 »

I just launched V3.1, October 11, 2021 = SDR-Radio V3.1, 64-bit, 2021-10-11_1117.exe
For this new version the program freezes very quickly

For my previous request, is not the waterfall zone lower part that is concerned but the upper part area which is without the shaded function
It's the same with your new version regarding shaded
I send you a Screenshot
Attachments
Screenshot-2021-10-11-181751.jpeg

User avatar
Simon G4ELI
Posts: 2134
Joined: Thu Aug 06, 2020 7:27 am
Location: Mawnan Smith
Contact:

Re: Shaded, Resolution, Solar

#5

Unread post by Simon G4ELI »

BM46 wrote: Mon Oct 11, 2021 4:21 pm I just launched V3.1, October 11, 2021 = SDR-Radio V3.1, 64-bit, 2021-10-11_1117.exe
For this new version the program freezes very quickly

For my previous request, is not the waterfall zone lower part that is concerned but the upper part area which is without the shaded function
It's the same with your new version regarding shaded
I send you a Screenshot
  • Ribbon Bar, Tools, Settings, uncheck Low Power.
Simon Brown :shock:
www.sdr-radio.com

Do not send me direct e-mail, thank-you!

BM46
Posts: 97
Joined: Fri Aug 21, 2020 9:07 am
Location: LOT, 46, France

Re: Shaded, Resolution, Solar

#6

Unread post by BM46 »

I can't find "LowPower. "

BM46
Posts: 97
Joined: Fri Aug 21, 2020 9:07 am
Location: LOT, 46, France

Re: Shaded, Resolution, Solar

#7

Unread post by BM46 »

OK seen

BM46
Posts: 97
Joined: Fri Aug 21, 2020 9:07 am
Location: LOT, 46, France

Re: Shaded, Resolution, Solar

#8

Unread post by BM46 »

Even with the "Low Power" option, the sound still works but the image freezes very quickly

User avatar
Simon G4ELI
Posts: 2134
Joined: Thu Aug 06, 2020 7:27 am
Location: Mawnan Smith
Contact:

Re: Shaded, Resolution, Solar

#9

Unread post by Simon G4ELI »

BM46 wrote: Tue Oct 12, 2021 6:32 am Even with the "Low Power" option, the sound still works but the image freezes very quickly
You don't need the low power option.

If the program freezes then I expect it's USB-related. Try a lower bandwidth, only use 24 MHz if really necessary.
Simon Brown :shock:
www.sdr-radio.com

Do not send me direct e-mail, thank-you!

BM46
Posts: 97
Joined: Fri Aug 21, 2020 9:07 am
Location: LOT, 46, France

Re: Shaded, Resolution, Solar

#10

Unread post by BM46 »

Increased memory, in permanence, until the program crashes

Post Reply