Special Points Requests
Shaded = For some time this parameter must be reset each time the program is opened. He didn't need it before.
Resolution = The same is true for the value of the chosen resolution, each time the program is opened, the value must be chosen again.
Too bad to have to reset these two parameters each time you open the program
These parameters should normally be recognized at each opening.
Another point.
Like the choice to display or not: Clock, Statistics, Frequency
have the possibility to display in addition the parameters: Solar Flux, Regions, Sunspots and A, K
Thank you in advance
Best regards
Shaded, Resolution, Solar
- Simon G4ELI
- Posts: 2134
- Joined: Thu Aug 06, 2020 7:27 am
- Location: Mawnan Smith
- Contact:
Re: Shaded, Resolution, Solar
- What version are you using? Get the latest kit please.
- Ribbon Bar, View, Waterfall Extras.
Re: Shaded, Resolution, Solar
ELAD FDM-S3 = Version 3.1 Build 2385
Re: Shaded, Resolution, Solar
I just launched V3.1, October 11, 2021 = SDR-Radio V3.1, 64-bit, 2021-10-11_1117.exe
For this new version the program freezes very quickly
For my previous request, is not the waterfall zone lower part that is concerned but the upper part area which is without the shaded function
It's the same with your new version regarding shaded
I send you a Screenshot
For this new version the program freezes very quickly
For my previous request, is not the waterfall zone lower part that is concerned but the upper part area which is without the shaded function
It's the same with your new version regarding shaded
I send you a Screenshot
- Simon G4ELI
- Posts: 2134
- Joined: Thu Aug 06, 2020 7:27 am
- Location: Mawnan Smith
- Contact:
Re: Shaded, Resolution, Solar
BM46 wrote: ↑Mon Oct 11, 2021 4:21 pm I just launched V3.1, October 11, 2021 = SDR-Radio V3.1, 64-bit, 2021-10-11_1117.exe
For this new version the program freezes very quickly
For my previous request, is not the waterfall zone lower part that is concerned but the upper part area which is without the shaded function
It's the same with your new version regarding shaded
I send you a Screenshot
- Ribbon Bar, Tools, Settings, uncheck Low Power.
Re: Shaded, Resolution, Solar
I can't find "LowPower. "
Re: Shaded, Resolution, Solar
OK seen
Re: Shaded, Resolution, Solar
Even with the "Low Power" option, the sound still works but the image freezes very quickly
- Simon G4ELI
- Posts: 2134
- Joined: Thu Aug 06, 2020 7:27 am
- Location: Mawnan Smith
- Contact:
Re: Shaded, Resolution, Solar
You don't need the low power option.
If the program freezes then I expect it's USB-related. Try a lower bandwidth, only use 24 MHz if really necessary.
Re: Shaded, Resolution, Solar
Increased memory, in permanence, until the program crashes