Frequency doubler option

🙋 If you want a new feature or a change to the software then add your request here.

If it's not here then it's not going to happen.
ham73
Posts: 1
Joined: Sat Nov 27, 2021 8:51 pm

Frequency doubler option

#1

Unread post by ham73 »

I am using my ADALM-Pluto TCVR with the HYDRA 3cm TRX module (see DUBUS 3/2020) which is in fact <<for the TX part>> a frequency DOUBLER (using XX1002 = Macom frequency doubler) of the ADALM PLUTO TX e.g. 5,184,100 MHz = 10.368,200 MHz
I have a problem to read the correct TX frequency of the HYDRA TRX module at the SDR Console which is showing the ADALM-PLUTO TCVR (TX) frequency which is in fact in the reality a half of the TX real frequency.....

Reading the SDR Console manual I don't see any solution - only an option - IF converter to ADD up/down converter frequency.

I am proposing to ADD an option to the SDR Console: TX frequency duobler (2x) or tripler (3x)

TNX and 73!

ham73

Post Reply