External Radio Options extra feature request

🙋 If you want a new feature or a change to the software then add your request here.

If it's not here then it's not going to happen.
ON7OFF
Posts: 21
Joined: Fri Oct 23, 2020 4:51 am

External Radio Options extra feature request

#1

Unread post by ON7OFF »

Dear,

simple feature to add in the External Radio Options menu, submenu Transmit.
Please add next to the Mute Audio checkbox a additional feature that will add extra time when the TX is going back to RX. There is some delay and I get very bad feedback from my TX into my SDR play.
So, next to the Mute Audio checkbox add Extend mute time with: xxx ms with an option to choose between 0 and 600ms.
This will help to get rid of the additional feedback when going to RX.


Thanks

oe3ide
Posts: 14
Joined: Wed Aug 19, 2020 11:56 am

Re: External Radio Options extra feature request

#2

Unread post by oe3ide »

vote +1

ON7OFF
Posts: 21
Joined: Fri Oct 23, 2020 4:51 am

Re: External Radio Options extra feature request

#3

Unread post by ON7OFF »

I think this picture will explain it all!

Image

ON7OFF
Posts: 21
Joined: Fri Oct 23, 2020 4:51 am

Re: External Radio Options extra feature request

#4

Unread post by ON7OFF »

I just calculated. I get a feedback of about 1500ms. So the mute should go up to at least 2 seconds. Can this be implemented?

K1LSB
Posts: 8
Joined: Tue Sep 15, 2020 9:56 am

Re: External Radio Options extra feature request

#5

Unread post by K1LSB »

Vote +1 here too, please.

User avatar
PD3LK
Posts: 517
Joined: Thu Aug 06, 2020 10:36 am

Re: External Radio Options extra feature request

#6

Unread post by PD3LK »

just curious.... obvious you are using a SDRplay for RX but what is your TX?
And more interesting why does it still TX'ing for about 1,5 sec after you stop?
Is there such a long delay in a serial connection? Is it a virtual comm port? wich one?

ON7OFF
Posts: 21
Joined: Fri Oct 23, 2020 4:51 am

Re: External Radio Options extra feature request

#7

Unread post by ON7OFF »

Hello Leon,

this is the setup:
RX: SDR Play RSP1A
TX: TS-480S
Splitter: Easy TR Switch from the QRPkits dot com website.

You can see the ugly feedback I get on my streams. I try to mute by adding the auto-mute feature, but it works intermittent.
Example:

Why to have the possible extended mute time: sometimes? I will add some waiting time to give additional protection with the TR switch to the SDRplay.

Kind regards

PS. A cosmetic feature:
I can also suggest to give the signal history meter a way to check, like I have done in the live stream, a gradient background, with 0->9 a dark background 9->9+20 another background, 9+20 -> 9+40 another background, etc. Just another suggestion.




------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If you love SDR Console, consider give a little donation. These guys are putting so much effort in the software, the earn a little financial help!

User avatar
PD3LK
Posts: 517
Joined: Thu Aug 06, 2020 10:36 am

Re: External Radio Options extra feature request

#8

Unread post by PD3LK »

ahh ok Kurt, cute little switch. I suppose you're using the RF sense on it, does it switch faster when you're using the manual input?
How do you use the relay contacts on it? 1. RX signal passes the switch when TX is off? or 2. short the RX antenne when TX?
2 seems to me a better protection for the RX as long there's no delay in switching ofcource.

btw, regards to your Thai wife from mine

User avatar
PD3LK
Posts: 517
Joined: Thu Aug 06, 2020 10:36 am

Re: External Radio Options extra feature request

#9

Unread post by PD3LK »

btw when you use the RF sniffing option and the relay has a to long fall-off delay then have a look at this capacitor (4.7u), try to make it smaller.
Attachments
Easy TR Switch.jpg

ON7OFF
Posts: 21
Joined: Fri Oct 23, 2020 4:51 am

Re: External Radio Options extra feature request

#10

Unread post by ON7OFF »

Hi Leon,

If you want the relay to hang a little longer, I guess the higher value the capacitor should have?
I hope they will implement this in extended mute time in their next version.

Kind regards.


-------------------------------------------------
If you love SDR Console, consider give a little donation. These guys are putting so much effort in the software, the earn a little financial help!

Post Reply