2021 is dedicated to the user - adding all the features an advanced user needs.

WebSDR as RX and SDR Console as TX?

🙋 If you want a new feature or a change to the software then add your request here.

If it's not here then it's not going to happen.
User avatar
HB9HCI
Posts: 8
Joined: Tue Sep 22, 2020 8:55 pm

WebSDR as RX and SDR Console as TX?

#1

Unread post by HB9HCI »

When receiving QO-100, problems with frequency stability quickly arise. Therefore it would be ideal if one could integrate a WebSDR like https://eshail.batc.org.uk/nb/ receiver into the SDR Console.
My attempt to use a Python program to read the SDR Console TX frequency and transfer it into the WebSDR failed because I could not get the TX frequency from the SDR Console. Is there any way to read this TX-Frequency from outside the SDR Console?

yo7fws
Posts: 10
Joined: Sat Nov 21, 2020 3:19 pm
Location: Slatina
Contact:

Re: WebSDR as RX and SDR Console as TX?

#2

Unread post by yo7fws »

Hello

I think a solution would be a program that emulates the CAT operation of a transceiver.
Extract the frequency from that emulator and use it further.

73
Constantin

User avatar
HB9HCI
Posts: 8
Joined: Tue Sep 22, 2020 8:55 pm

Re: WebSDR as RX and SDR Console as TX?

#3

Unread post by HB9HCI »

Hello Constanin
good idea. I didn't found/expect the CAT ability of SDR Console. With a virtual com driver it should work....
Thanks Andreas

User avatar
PD3LK
Posts: 295
Joined: Thu Aug 06, 2020 10:36 am

Re: WebSDR as RX and SDR Console as TX?

#4

Unread post by PD3LK »

In case you can't find it Andreas.

For Simon: the yellow circeled statement has proberbly been outdated...there's a tool for Omni-Rig somewhere on the net that's called Omni-Rig Sync to sync two rigs via a VSC.
Attachments
Serial Ports.jpg

Post Reply