Hi There, new user,
I have installed my rx888 mk2 and the dependency's I have no signal on receive on either the hf or the vhf antennas.
SDR console seems to see the rx888 mk2 I'm wondering if there's any other drivers or settings i may have missed.
asus A15 usb 3.2 gen 2
microsoft c++ redistributables 2008 2010 2013 2015-2019 x86/x64
cyprus fx3
cyprus api
SDR console 3.0.27 x64
Regards
Mark
rx888 mk2 no receive
Re: rx888 mk2 no receive
Probably a silly question but have you gone into the radio menu, set HF attn to 0 and wound up the gains to max? Tools, options Performance, do you see any readings when it's running? Even if I turn down the gain to min and max attenuation to lose every last signal I can still see plenty of of FFT and CPU activity on the usage meter.
Re: rx888 mk2 no receive
thanks for the reply seems like the fft and the cpu is doing something, i dont see the att or the rf gains settings in the menu
Re: rx888 mk2 no receive
seems theres no gains in this one either
https://lirp.cdn-website.com/46d0be53/d ... -1920w.png
https://lirp.cdn-website.com/46d0be53/d ... -1920w.png
Re: rx888 mk2 no receive
appears to work in HDSDR
Re: rx888 mk2 no receive
The screenshots title shows it was discovered as an RX666.
You should delete this and rediscover the radio as an RX888.
Good luck.
You should delete this and rediscover the radio as an RX888.
Good luck.
Re: rx888 mk2 no receive
seems it works now after redetecting the driver for the rx888
thanks bagmouse7 you have a sharp eye
thanks bagmouse7 you have a sharp eye
Re: rx888 mk2 no receive
While the MKII seems to be up and alive for me, it doesn't look like it is seeing any signals. Any thoughts?
Re: rx888 mk2 no receive
Does it work with HDSDR and the recommended DLL?
This is the main software the developer uses.
I'm not sure if Simon has checked the Mk 2 version?
73 Alan
This is the main software the developer uses.
I'm not sure if Simon has checked the Mk 2 version?
73 Alan
Re: rx888 mk2 no receive
The Mk 2 version works.
You have the HF gain set all the way up in that screenshot.
Set the gain down to 40 or 50.
Good luck.
You have the HF gain set all the way up in that screenshot.
Set the gain down to 40 or 50.
Good luck.