V (overload) LED operation

✔ Now supported, kit available by the end of September 2020.
wa2zkd
Posts: 9
Joined: Tue Feb 22, 2022 8:26 pm

V (overload) LED operation

#1

Unread post by wa2zkd »

My Dragonfly was working fine for a few days. Overnight, with no changes in settings or antennas the V LED came on and remains on when the radio is active regardless of whether it has any antennas. It still seems to work otherwise. Is there a way to reset that?

Max
Posts: 859
Joined: Thu Aug 13, 2020 9:47 am

Re: V (overload) LED operation

#2

Unread post by Max »

Hello James

This is the support group for the SDR software, SDR Console: https://www.sdr-radio.com/

You would be better posting this question in the "Next Generation SDR" IO Group:

https://groups.io/g/NextGenSDRs

You should get a response there as the designers of your radio are also active in that group.

73

Max

wa2zkd
Posts: 9
Joined: Tue Feb 22, 2022 8:26 pm

Re: V (overload) LED operation

#3

Unread post by wa2zkd »

Thanks

wa2zkd
Posts: 9
Joined: Tue Feb 22, 2022 8:26 pm

Re: V (overload) LED operation

#4

Unread post by wa2zkd »

Unfortunately, there is very little traffic in the IO Group and no one has responded to me other than a suggestion to come here!

User avatar
ukdx
Posts: 41
Joined: Wed Nov 18, 2020 7:52 am

Re: V (overload) LED operation

#5

Unread post by ukdx »

I saw your post on io but didn't respond as I coudn't offer any advice. Which model do you have, googling Dragonfly RX103 throws up a tweet from 2020 but you say it's a variant? Which model is it and this LED, is it marked as V? A photo of the SDR would help a lot.

wa2zkd
Posts: 9
Joined: Tue Feb 22, 2022 8:26 pm

Re: V (overload) LED operation

#6

Unread post by wa2zkd »


User avatar
ukdx
Posts: 41
Joined: Wed Nov 18, 2020 7:52 am

Re: V (overload) LED operation

#7

Unread post by ukdx »

Well I've not seen that one before! All I can suggest is if you get no luck anywhere else you tweet Justin as I think he's the source of many of these. https://twitter.com/fei666888

Post Reply