It's all about the Software

Hi all
I would like to help me, how to place Adalm Pluto in windows 10 home.
Thanks

https://www.sdr-radio.com/pluto may help - just plug it in.

Hi Simon

I install the driver, M2k-usb but pluto sdr is not recognized. There are step by step installation instructions?

73s, Harris

Harris,
You read the Pluto instructions https://wiki.analog.com/university/tool ... uick_start
Alan

Have you bothered to read the Adalm-Pluto pages?

https://wiki.analog.com/university/tool ... uick_start

The first two steps are critical. The others are just using it in some environments. You Must Install The Drivers.

{o.o}

If you have the Pluto drive appear when you plug it in, have you tried to create a definition for it in SDRConsole?

{^_^}

jdow wrote: ↑Wed Nov 25, 2020 1:17 pm If you have the Pluto drive appear when you plug it in, have you tried to create a definition for it in SDRConsole?

{^_^}

Hi

When I connect pluto to the usb, nothing is displayed. The sdr console does not recognize pluto sdr.

On the contrary the hackrf and sdrplay works normally on the console.

Thanks, Harris

Not even an "Unknown Device" in Device Manager?
Alan

G4ZFQ wrote: ↑Thu Nov 26, 2020 12:06 pm Not even an "Unknown Device" in Device Manager?
Alan

No, nothing Alan, looks like does not exist.

It could be faulty but -
Have you tried another USB3 cable?
Have you tried all USB3 sockets you have?
A powered USB3 hub?
Another computer?

Alan