As the drop-down conceals the driver we cannot tell. Zadig can install one of 3 drivers.
Win USB is the normal one.
Also a check of Device manager will tell if there is a problem.
Alan
SDR Starter problem
Re: SDR Starter problem
You have to use Zadig to replace the driver that was automatically installed by Windows.
It looks like you have only gone as far as letting Zadig tell you what devices are on the system.
Do it for both Bulk interface devices 0 & 1, they are both on the same RTL-SDR.
Martin
m3ghe
IO92sc
G-QRP club 6129
Use my online radios http://remoteradio.myddns.me/ or http://remoteradio.changeip.org/
m3ghe
IO92sc
G-QRP club 6129
Use my online radios http://remoteradio.myddns.me/ or http://remoteradio.changeip.org/
Re: SDR Starter problem
OK
I have reinstalled both of interfaces (0,1).
As shown in the attachment does RTL Dongle(TCP) is right?
I have reinstalled both of interfaces (0,1).
As shown in the attachment does RTL Dongle(TCP) is right?
Re: SDR Starter problem
No it isn't right. Zadig installs the USB driver for the RTL-SDR. You have selected RTL Dongle(TCP).
If the dongle is connected to a USB port on the same PC as SDR Console then you should be selecting RTL Dongle(USB).
If you have the dongle connected to another computer, tell me now.
Martin
m3ghe
IO92sc
G-QRP club 6129
Use my online radios http://remoteradio.myddns.me/ or http://remoteradio.changeip.org/
m3ghe
IO92sc
G-QRP club 6129
Use my online radios http://remoteradio.myddns.me/ or http://remoteradio.changeip.org/
Re: SDR Starter problem
Thanks a lot.
Finally, I can run it with RTL Dongle(USB) without a problem.
I took a screenshot of my status.
Now, a beep noisy sound has been heard from the speaker.
How can find it is in FM modulation or AM modulation?
How can I switch it to AM 730 or Airplane communications?
Thanks again.
Finally, I can run it with RTL Dongle(USB) without a problem.
I took a screenshot of my status.
Now, a beep noisy sound has been heard from the speaker.
How can find it is in FM modulation or AM modulation?
How can I switch it to AM 730 or Airplane communications?
Thanks again.
Re: SDR Starter problem
Hi, you find everything here:
https://www.sdr-radio.com/receive-dsp
https://www.sdr-radio.com/receive-dsp
Re: SDR Starter problem
Thank you.
I have read https://www.sdr-radio.com/receive-dsp but still, I don't know how can I set the receiver to AM 730 kHz?
I have attached my current status.
I don't know what is the meaning of 730.000.000. Is it 730 MHz or 730 kHz?
Also, Does my setting set to AM by the arrowed button?
Thanks again.
I have read https://www.sdr-radio.com/receive-dsp but still, I don't know how can I set the receiver to AM 730 kHz?
I have attached my current status.
I don't know what is the meaning of 730.000.000. Is it 730 MHz or 730 kHz?
Also, Does my setting set to AM by the arrowed button?
Thanks again.
Re: SDR Starter problem
You are tuned to 730 MHz.
Regards. Colin VK5HI.
Regards. Colin VK5HI.
Re: SDR Starter problem
Ok,
I have only noisy sound when I set it to AM 690 (CBC) or AM 730 (Vancouver Traffic) and I can not hear any vocal sound.
Do you know what is my problem?
I have only noisy sound when I set it to AM 690 (CBC) or AM 730 (Vancouver Traffic) and I can not hear any vocal sound.
Do you know what is my problem?