CAT commands through UDP/TCP?

MIDI, ...
py2oc
Posts: 7
Joined: Mon May 09, 2022 6:04 pm

CAT commands through UDP/TCP?

#1

Unread post by py2oc »

Hello.

Can SDR Console exchange CAT information through UDP or TCP?
I am running SDR console for QO-100.
To logging contacts I'm running a CAT software that reads the frequencies from Console and send them to logging software. All connections between the softwares are through virtual serial ports which are quite unstable.

Also, can Console send the TX frequency through CAT? I couldn't find where to enable it.
Monitoring the communication between Console and CAT software, I see only RX frequency sent from Console (in IF command response).

73 de PY2OC, Luiz

User avatar
PD3LK
Posts: 517
Joined: Thu Aug 06, 2020 10:36 am

Re: CAT commands through UDP/TCP?

#2

Unread post by PD3LK »

Hi Luiz

Can SDR Console exchange CAT information through UDP or TCP?

No, it can't.
Lot of people (including me) use Com0Com virtual serial ports, it is very stable.

can Console send the TX frequency through CAT?
See attachment, is this usefull for you?

regards, Leon
Attachments
T2000 protocol TX.jpg

jdow
Posts: 800
Joined: Mon Aug 10, 2020 8:17 pm

Re: CAT commands through UDP/TCP?

#3

Unread post by jdow »

Here is an interesting article regarding serial port over IP.

http://com0com.sourceforge.net/doc/UsingCom0com.pdf

{^_^}

Post Reply