2021 is dedicated to the user - adding all the features an advanced user needs.

Version 3.0.36 spectrum problem

All bug reports here please
G7JUR
Posts: 2
Joined: Sat Oct 10, 2020 9:28 am

Version 3.0.36 spectrum problem

#1

Unread post by G7JUR »

Just installed the new release. The problem I have is Shaded will not stay enabled in the spectrum, after restart.
The odd thing is that when running on my laptop as a remote setup, this problem does not happen.

Philip G7JUR

BarneyBear65
Posts: 3
Joined: Wed Aug 19, 2020 12:30 pm

Re: Version 3.0.36 spectrum problem

#2

Unread post by BarneyBear65 »

I have the same problem with the spectrum shading is disabled after restart.

G7JUR
Posts: 2
Joined: Sat Oct 10, 2020 9:28 am

Re: Version 3.0.26 spectrum problem

#3

Unread post by G7JUR »

That's good. I did a clean install, still not working correctly.
Odd thing is that it works fine on my laptop.
Both computers running Windows 10 64 Bit

My desktop has a AMD processor, and the laptop has an Intel.
Philip G7JUR

yo3ihg
Posts: 4
Joined: Sat Jan 16, 2021 9:31 am

Re: Version 3.0.36 spectrum problem

#4

Unread post by yo3ihg »

I can confirm this issue as well. It's happening on two laptops that I am using.

Vlad YO3IHG

G3TDJ
Posts: 7
Joined: Mon Jan 25, 2021 1:24 pm

Re: Version 3.0.36 spectrum problem

#5

Unread post by G3TDJ »

Perhaps your CPU is classed as "low power" by SDRC. See the 3.0.26 Release Notes

viewtopic.php?t=604

...Changed definition of a low power CPU to include a CPU such as the Q8400 / Q9000 which does not have the SSE4.2 extended instructions.
If you have a low power CPU (see start of logfile) then on startup:
Spectrum shading is disabled,

A peek at the start of the log file will confirm

User avatar
Simon G4ELI
Posts: 1364
Joined: Thu Aug 06, 2020 7:27 am
Location: Mawnan Smith
Contact:

Re: Version 3.0.36 spectrum problem

#6

Unread post by Simon G4ELI »

I'll add an option to override the automatic Low Power computer setting.
Simon Brown :shock:
www.sdr-radio.com

Do not send me direct e-mail, thank-you!

rainstar
Posts: 11
Joined: Sat Dec 19, 2020 4:06 am

Re: Version 3.0.36 spectrum problem

#7

Unread post by rainstar »

sometimes sdrradio will crash under a specific condition:
select a memory. drag the interface to another signal using the waterfall that is possibly outside of the tunable range so that the previously tuned channel is no longer being decoded, even if it is
still selected. select "back".

User avatar
PD3LK
Posts: 276
Joined: Thu Aug 06, 2020 10:36 am

Re: Version 3.0.36 spectrum problem

#8

Unread post by PD3LK »

Hi Rainstar, if your issue has nothing to do with the start of this thread dan please start a new post and give us some more details about your computer, radio, used freq's when this happens and screenshot(s) to clarify the issue. "Stealing" an existing thread in every forum, is a recipe to being ignored. ;)

Post Reply