strange behaviour using multible receivers

All bug reports here please
VK5HW
Posts: 10
Joined: Mon Sep 06, 2021 7:02 am

strange behaviour using multible receivers

#1

Unread post by VK5HW »

G'Day,

I've just noted that there seems to be an issue when running multible receivers.
Say I have three RX's, 10/15/17, and audio going to three different cables (virtual). I can get only two outputs to work. Strange think is if I make the last RX (17) the active one, it produces audio but RX one (10) deactivates.
Just noted that if I add another RX (20), 20 has audio output but 17 doesn't however, selecting 20; 10 stops and 15/17/20 work.

I can't be 100% sure, but from memory (its like Swiss cheese) I've had this working with at least six receivers with an earlier version.

I hope the attached screen record shows what I'm trying to convey.

73 Hauke VK5HW

SDR-C
Ver: 3.1 build 2320
Attachments
2021-11-22_10-18-59.mp4
(8.72 MiB) Downloaded 32 times

VK5HW
Posts: 10
Joined: Mon Sep 06, 2021 7:02 am

Re: strange behaviour using multible receivers

#2

Unread post by VK5HW »

I must clarify. The RX is not deactivated nor is it muted. It does'nt produce any audio is what I tried to convey (not very succesful I think).

Hope that clears the muddy waters a bit.

User avatar
PD3LK
Posts: 517
Joined: Thu Aug 06, 2020 10:36 am

Re: strange behaviour using multible receivers

#3

Unread post by PD3LK »

pls tell us what VAC software you are using? Is it maybe a restricted free version?
grtz, Leon

Post Reply