Calibration-value for dc-q stored incorrectly

All bug reports here please
stefanpi
Posts: 2
Joined: Tue Nov 23, 2021 8:29 pm

Calibration-value for dc-q stored incorrectly

#1

Unread post by stefanpi »

The problem occurs in 3.1 Betas from September and November, using LimeSDR

After tx-calibration the calibration-values are shown correctly in the adv. options page, but the DC-Q-value is stored incorrectly. after reload it is reset to 0, which causes miscalibration at every startup. my workaround: write the correct value in the calibration-file manually and NEVER recalibrate in the console.
config.png
config1.png

stefanpi
Posts: 2
Joined: Tue Nov 23, 2021 8:29 pm

Re: Calibration-value for dc-q stored incorrectly

#2

Unread post by stefanpi »

Same problem seems to occcur at RX-DC calibration

Post Reply