Hello!
I have a little problem SDR Console 3.2 and above Server not send data to client using RX-888 mk II
I have a computer. To this computer connect a few receivers. On this computer running SDR Console Server. On other computer running SDR Console 3.2. When I select RX-888 mk II, Console have no waterfall and no sound. On other receivers - RSP1 clone and HackRF sound and waterfall is very fine! Problem only with RX-888 mk II
Piece of server log:
2022-12-26 10:31:38, Server 1> Select: No client activity for 20 seconds, closing
2022-12-26 10:31:38, Server 1> Closing connection, is connected Yes
2022-12-26 10:31:38, Server 1> SetLastLogoutTime for
2022-12-26 10:31:38, Server 1> Stopping sending
2022-12-26 10:31:38, Server 1> StopSending line 1077, ++
2022-12-26 10:31:38, Server 1> StopSending line 1078, RequestReaderStop
2022-12-26 10:31:38, Server 1> StopSending line 1081, WaitUntilQueueEmpty
2022-12-26 10:31:38, Server 1> StopSending line 1084, Radio StopSending
2022-12-26 10:31:38, Server 1> StopSending line 1087, Reset
2022-12-26 10:31:38, Server 1> StopSending line 1098, --
2022-12-26 10:31:38, Server 1> Stopped
2022-12-26 10:31:38, Server 1> Closing radio
2022-12-26 10:31:38, Server 1> Radio closing (0)
2022-12-26 10:31:38, Server 1> Radio closed
2022-12-26 10:31:38, Server 1> Unlocking radio
2022-12-26 10:31:38, Server 1> Closed
2022-12-26 10:31:38, Server 1> Radio is not locked
2022-12-26 10:31:38, Server 1> Radio unlocked
2022-12-26 10:31:38, Server 1> Server stopped
I downloaded old software kits from site. Versions 3.0.27, 3.0.28 and 3.1 working normally. 3.2 and 3.3 beta have problem.
SDR Console 3.2 and above Server not send data to client using RX-888 mk II
Re: SDR Console 3.2 and above Server not send data to client using RX-888 mk II
feel your pain as similar issues, it's most odd that server and client connect in server log file- but as you say no waterfall or sound
from my issues it appears server closes connection as it can't see client respond after initial handshake
from my issues it appears server closes connection as it can't see client respond after initial handshake