MMSSTV and the new YoniQ Mode

User avatar
lappydesktop
Posts: 70
Joined: Sat Jan 21, 2023 11:22 am
Location: DownUnder

MMSSTV and the new YoniQ Mode

#1

Unread post by lappydesktop »

As your probably aware? MMSSTV has been updated a bit into the 21st century by some EA's over there in Espania , the latest version is 1.13.3 and is on the EA's website http://radiogalena.es/yoniq/ and use a translator , YoniQ does have some quirks still .

The YoniQ mode is propriety to this version above and the previous v1.13.2 and has its own mode button .

The YoniQ mode is around 3 seconds slower than scottie 2 which 71 seconds for a 320x256 so is around 75 seconds also with a much slower scan/sync rate (about half) than scottie 2.

The YoniQ mode can only be decoded by another Yoniq! otherwise it just looks like a smear of colours .

Now onto the quick test we did last night on 40m , distance around 1200klm , the band a bit crashy/staticy both ends , sigs around S8 both ends and fairly steady , same goes for the Noise .

These are the RX pictures i received

1st is YoniQ then Scottie 2 look at the time which is the last 4 numbers in UTC , IE:1026 utc

3, 4 , 5 are YoniQ , then Scottie 2 , then Scottie 1 being the last one

Cheers Paul VK4AGK
Attachments
202307071026.jpg
202307071026.jpg (45.16 KiB) Viewed 1769 times
202307071025.jpg
202307071025.jpg (45.42 KiB) Viewed 1769 times
202307071014.jpg
202307071014.jpg (28.68 KiB) Viewed 1769 times
202307071012.jpg
202307071012.jpg (28.58 KiB) Viewed 1769 times
202307071010.jpg
202307071010.jpg (43.28 KiB) Viewed 1769 times

Post Reply