Pluto CW TX

Also known as ADALM-PLUTO.
EI2GLB
Posts: 1
Joined: Sat Aug 05, 2023 11:02 pm

Pluto CW TX

#1

Unread post by EI2GLB »

Hi All

I am trying to get my Pluto and SDR console to TX CW,

What I find is that if I set it to USB I can TX using MRP40 and of course RX is okl

But when I set the Pluto via Console to CW I can not get the audio from MRP40 to TX from SDR Console, now the keying can be seen in the audio TX spectrum but it's not being transmitted?

anyone any ideas, Ideally I would like to use CW mode and not have to mess about with the filters in USB,

Thanks
Trevor
EI2GLB

User avatar
Simon G4ELI
Posts: 2133
Joined: Thu Aug 06, 2020 7:27 am
Location: Mawnan Smith
Contact:

Re: Pluto CW TX

#2

Unread post by Simon G4ELI »

EI2GLB wrote: Mon Nov 06, 2023 10:49 pm Hi All

I am trying to get my Pluto and SDR console to TX CW,

What I find is that if I set it to USB I can TX using MRP40 and of course RX is okl

But when I set the Pluto via Console to CW I can not get the audio from MRP40 to TX from SDR Console, now the keying can be seen in the audio TX spectrum but it's not being transmitted?

anyone any ideas, Ideally I would like to use CW mode and not have to mess about with the filters in USB,

Thanks
Trevor
EI2GLB
Good point, I'll have a look at this. Maybe we do or don't want audio to come through when using CW TX.
Simon Brown :shock:
www.sdr-radio.com

Do not send me direct e-mail, thank-you!

Post Reply