AM / SAM

[oe3ide]

Hi,
pls make it possible, to disable SAM, or keep the selected mode "AM".

If I switch to AM, on the next tune to a station (i.e. point&click or mouse-scroll), SDR Console switches back to SAM.
Using 3.0.24, Airspy HF+ discovery.
Thanks!
Information also here: https://sdr-radio.groups.io/g/main/topi ... 0,76274756

73s Ernst
OE3IDE

[Simon G4ELI]

Hi,
pls make it possible, to disable SAM, or keep the selected mode "AM".

If I switch to AM, on the next tune to a station (i.e. point&click or mouse-scroll), SDR Console switches back to SAM.
Using 3.0.24, Airspy HF+ discovery.
Thanks!
Information also here: https://sdr-radio.groups.io/g/main/topi ... 0,76274756

73s Ernst
OE3IDE

It shouldn't switch back to SAM if you simply tune. I can understand this if you select a Favourite or saved memory, but not simply tuning. Do you have an external radio connected?

[m3ghe]

Hi,
pls make it possible, to disable SAM, or keep the selected mode "AM".

If I switch to AM, on the next tune to a station (i.e. point&click or mouse-scroll), SDR Console switches back to SAM.
Using 3.0.24, Airspy HF+ discovery.
Thanks!
Information also here: https://sdr-radio.groups.io/g/main/topi ... 0,76274756

73s Ernst
OE3IDE

I understand you are using an external radio, do you have mode mapping enabled?

[oe3ide]

Hi,
yes, running the Airspy HF+ discovery, controlled via OmniRig from FT-2000.

Checked the mode-mapping setting. Is on "AM".

How it behaves, see here:
https://www.oe3ide.com/wordp/wp-content ... AM_SAM.mp4

73 de Ernst

[m3ghe]

Yes I can confirm, point and click and the mode changes from AM to SAM.
The same also applies if you are using ECSS-L or ECSS-U it also switches to SAM.
Mode mapping is set to AM for external radios.
This is only with an external radio tracking the main rain radio.
I never noticed this before myself.

[Simon G4ELI]

Hi,
yes, running the Airspy HF+ discovery, controlled via OmniRig from FT-2000.

Checked the mode-mapping setting. Is on "AM".

How it behaves, see here:
https://www.oe3ide.com/wordp/wp-content ... AM_SAM.mp4

73 de Ernst

What happens if the External Radio is not enabled? Please try this, will help me.

[m3ghe]

Hi,
yes, running the Airspy HF+ discovery, controlled via OmniRig from FT-2000.

Checked the mode-mapping setting. Is on "AM".

How it behaves, see here:
https://www.oe3ide.com/wordp/wp-content ... AM_SAM.mp4

73 de Ernst

What happens if the External Radio is not enabled? Please try this, will help me.

Simon, at my end it only happens with external radio enabled.
The moment you switch the external radio on it pulls it to SAM.

[oe3ide]

Same here, if I stop tracking the external radio, it keeps AM.

73 Ernst

[Simon G4ELI]

Same here, if I stop tracking the external radio, it keeps AM.

73 Ernst

OK, thanks - I know where to look.