IQ file playback
Posted: Tue Apr 06, 2021 3:44 pm
Hi,
When playing back a recorded I/Q file, I don't get on SDR console the same bandwith than that displayed by the Analyser :
On the right hand side window (analyser), the recorded range starts at 16.64-0.9216=15.72MHz and ends at 16.64+0.9216=17.53MHz.
On the left hand side window (Console), when playing back the file, the displayed range starts at 15.5MHz and ends at about 17.2 MHz
What went wrong ?
73 de F1GOC
When playing back a recorded I/Q file, I don't get on SDR console the same bandwith than that displayed by the Analyser :
On the right hand side window (analyser), the recorded range starts at 16.64-0.9216=15.72MHz and ends at 16.64+0.9216=17.53MHz.
On the left hand side window (Console), when playing back the file, the displayed range starts at 15.5MHz and ends at about 17.2 MHz
What went wrong ?
73 de F1GOC