It's all about the Software

Dear Simon, I am glad to welcome you!! Please help me. It is not possible to configure the console to display the 10GHz frequency for normal QO-100 reception, with the normal display on the DSP panel. Settings to display as 99.9 made, settings in the converter made... I can't do it... Help me with some advice. Sincerely, RW3DVG, Alex!

tools menu->Options
Upper right. Tick the middle radio button.
That allows the digits to display. It does nothing about conversion. See your posting over in Pluto for a suggestion for posting images to help us help you.

At a hint use the full editor and preview what you have posted and (sigh) annoy the system enough that it will finally post your image(s).

{^_^}

Oberon wrote: ↑Thu May 13, 2021 6:47 pm Dear Simon, I am glad to welcome you!! Please help me. It is not possible to configure the console to display the 10GHz frequency for normal QO-100 reception, with the normal display on the DSP panel. Settings to display as 99.9 made, settings in the converter made... I can't do it... Help me with some advice. Sincerely, RW3DVG, Alex!

See https://www.sdr-radio.com/EsHail-2#ConsoleConfiguration

".....See https://www.sdr-radio.com/EsHail-2#ConsoleConfiguration......."
Thank you for your reply!! I've done it all, but it doesn't work out for me. In the attachment is a screenshot from my console. The color indicates that the converter is enabled with the required spacing... What am I doing wrong??

Not sure if it's related (probably not), but you are running very outdated version of SDR Console. Current is 3.0.27:

https://www.sdr-radio.com/download

Max

Did not realise you had two post topics on the go. I see you are now sorted, but I'd still update to latest 3.0.27.

Max

Thank you all so much for helping me solve my problem!! Yes, everything works fine, from the moment I dialed the 10GHz frequency on the console panel!! Once again, thank you all so much for your help!!!