RX888 Range
Posted: Fri Sep 29, 2023 4:27 pm
Hi!
the frequency range on the RX888 is tricky. SDRconsole swithced too early from the HF port to the VHF port. When the center marker of the band width selector hits 16Mhz the VHF is choosen.
As the RX888 can run the HF until 30 Mhz, this is far too early.
Best !
the frequency range on the RX888 is tricky. SDRconsole swithced too early from the HF port to the VHF port. When the center marker of the band width selector hits 16Mhz the VHF is choosen.
As the RX888 can run the HF until 30 Mhz, this is far too early.
Best !