SDR Console V3.3 with Log4OM2 !!!

[rasp123]

Hi,

I am trying to interface the SDR Console V3.3 with Log4OM2.

I am not succeeding to get the VFO & mode information to the Log4OM2 application.

Log4OM2 works fine with my FT991A.

An suggestions as to how to get this fixed?

Thanks
Ravi

[Max]

I am trying to interface the SDR Console V3.3 with Log4OM2.
I am not succeeding to get the VFO & mode information to the Log4OM2 application.
Any suggestions as to how to get this fixed?

Log4OM works very well with SDRC. Just use virtual serial port pair to connect Log4OM to SDRC:

https://www.sdr-radio.com/SerialPort

I strongly suggest using VSP Manager from K5FR as it always seems to work very well with SDRC. Also, if you decide to use Omnirig, do NOT use Omnirig 2.0. It's not the official version and it does not work with SDRC. Get the latest version from DX-Atlas, currently v1.2 :

https://dxatlas.com/omnirig/

When using VSP Manager to set up the virtual com ports, go to Properties of the VSP Manager .exe file and set "compatibility mode" and also "Run as Administrator" (see picture):

VSPMgr.gif (62.22 KiB) Viewed 1889 times

Good luck.

Max

[gfmucci]

From this page: VSP Manager by K5FR.
There is this line: "If you are an Amateur Radio Operator and would like to use VSP Manager for your *Personal* use, contact me with your call letters and I'll be happy to send you a copy."

"me" is a link to nowhere in that line. Is there another way for a ham to contact for a download of VSP Manager?

[mbott]

The link resolves to snance@charter.net for me.