Page 1 of 1
Mute PC/SDR
Posted: Wed Oct 07, 2020 11:51 pm
by N5ANY
I Have the mute function set for strong signals, however I do not believe it is working correctly or there is an operator error. I have the RSP1A and a Yaesu FT1000MP with the pandadpter board installed. When I transmit I get the huge signal and lots of feedback from the speakers. Is there a way to kill the receiver or mute it when I transmit.
Thank You
Chuck N5ANY
Re: Mute PC/SDR
Posted: Thu Oct 08, 2020 4:57 am
by Simon G4ELI
Hi,
Screenshots always help. Wideband DSP is the easy way to do this:
Ribbon Bar, Home, Wideband DSP, Auto-mute.
Re: Mute PC/SDR
Posted: Sat Oct 24, 2020 10:54 pm
by N5ANY
That helped a little I still get a lot of feed back and through the PC.
Re: Mute PC/SDR
Posted: Sun Oct 25, 2020 6:36 am
by Simon G4ELI
N5ANY wrote: ↑Sat Oct 24, 2020 10:54 pm
That helped a little I still get a lot of feed back and through the PC.
When you get feedback has the waterfall stopped displaying data? If so this is audio getting into the cabling. Please post a screenshot so I can be sure you have the Mute working.
Re: Mute PC/SDR
Posted: Wed Oct 20, 2021 9:05 pm
by N5ANY
This was corrected in the latest release.
Re: Mute PC/SDR
Posted: Thu Oct 21, 2021 4:36 am
by Simon G4ELI
N5ANY wrote: ↑Wed Oct 20, 2021 9:05 pm
This was corrected in the latest release.
Thanks.