It's all about the Software

Hi,
If the S3 is set with Bandwidth 24.576MHz and the Range Slider below is completly on the left side, the V3 produce images in the upper frequency range from the medium wave.

Regards
Fernando

I'm not a technical expert with the finer workings of SDR, but what you see there is normal. Google "SDR aliasing" or similar.

G0OFE wrote: ↑Fri Jan 22, 2021 5:01 pm I'm not a technical expert with the finer workings of SDR, but what you see there is normal. Google "SDR aliasing" or similar.

You could be right. SW2 does that too ...
Thanks for the hint.