It's all about the Software

Media-Tech USB RTL dongle installed, recognized, no signal at all

any idea ?

small indoor antenna installed by default
no signal at all

RTL usb dongle donated by my friend
since another Media Tech usb dongle purchased a week ago was to short to...

SDR Console v.3.2 32-bit installed, Media-Tech usb RTL dongle installed, recognized, no signal at all (Windows 7)

Is there any way to check if any signal is received ?

RTL Dongle USB - unknown 20 -2000Mhz (drivers installed)

dBm meter set at...

I have upgraded status of your mail from spam to not spam with Gmail

(forum registration confirmation email received by Gmail)

im using a RTL SDR v3 , this happens when i use the right button of my mouse to move around the frequency or when i click on the center button, and no, this is not a dc spike, this thing its jumping .

This evening I wanted to record a few hours of LRA36 on 15476, so I pointed SDR Console 3.2 at my Airspy, set the bandwidth to 192 kHz, and started recording. Reception was very good for the first hour and a half, then started to fade. After 3 hours...

Hello!
I have a little problem SDR Console 3.2 and above Server not send data to client using RX-888 mk II
I have a computer. To this computer connect a few receivers. On this computer running SDR Console Server. On other computer running SDR...

Hi,

Hi, I use SDR Console as panadapter for IF K3+FCD+. Working fine but randomly accidentally stops meter to show a real value. After some time he shows again. This is repeated accidentally. Screenshot-2023-03-07-193823.jpeg

Dear,

A setup is made with an AOR-AR8600 with 10.7MHz IF Out connected to an RTL-SDR.
The AR8600 is setup as external radio with Rigctl
The RTL-SDR is radio 1
In External Radio options, SDR frequency selection, the IF output with an offset of...

Hello,
I have SDR console V3,2 installed and running fine with Airspy SDR+Discovery. Also working fine with web based SDR's. However I have not been able to get audio from Headphone jack into external powered speakers- always coming from Dell...

Hi
I probably forgot a parameter in my SDR Console setup using a RSP1A and a Yaesu FTdx via Omnirig.
At the start of SDR Console the «External Radio» window starts automatically and shows the frequency of the TX from Omnirig as expected but the main...

Is it possible to keep waterfall fixed, when the External Radio has IF output selected, and have tuning bar moving when frequency is changed, similar to when Antenna: same frequency as external radio is selected?

Denny, KX7M

Hello everyone,
Been Licensed here in the UK since the early 1980s and I have just started to get some interest back.

I was introduced to the RSP-1A which I use to listen with a long wire but the QRM around here is hammering me at S9 on 40 and 80m...

I have 2 receivers windows open both on different frequencies, is it possible to monitor the audio from both at the same time without having to mouse over each window

Hi,

i like the SDR-Console very much. I use it on Shortwave and QO100. My next plan is to work Satelittes on VHF/UHF with pluto and pa.
Now my question is if it whould be possible to make an connection to mqtt server. Many thinks would be possible....

I am trying to make up a database of some local frequencies but I cannot get the list added to the software, the Add to Database button is always disabled.

Does anyone have a sample csv with populated data I can look at please

Is there anyway I can store 10 freq (Air Traffic Control) and just scan those 10 freq?

Adelaide Approach (East of Adelaide) 118.200
Adelaide Approach (East of Adelaide) 130.450
Adelaide Approach (Kangaroo Island) 123.050
Adelaide Approach (North of...

Hi
I probably forgot a parameter in my SDR Console setup using a RSP1A and a Yaesu FTdx via Omnirig.
At the start of SDR Console the «External Radio» window starts automatically and shows the frequency of the TX from Omnirig as expected but the...

I know most newer TV/Monitors don't have this problem. However it can occur with some. My suggestion is an option to allow the image to randomly shift a few bits up, down, left and right to prevent screen ghosting/burn-in.

TX N7QPP

Radio G33DDC with V. 3.3 B2870 Win10 64 most recent MS build.

The console defaults to NR3 on first install, selecting any other NR# ( noise reduction ) or ( turning it OFF) attenuates the audio to a very low unusable level. Selecting NR3...

Anyone try using a QDX with SDRConsole? Recent firmware has allowed a I/Q output, so the full 48khz bandwidth can be used. Someone on their forums mentioned he was able to get it working using one of the existing radio entries, OmniRig and the...

Hello.

I'm running SDR Console version 3.3 build 2870 (64 bit) on Windows 10.
When moving the mouse over Mode or Filter buttons the labels names changes ramdomly. For example, moving the mouse over Mode ... button its label changes to CW-U and...

May not be a bug but an observation.
SDR Play RSPDX, Virtual audio (Voicemeeter Potato)

The filters appear to leak for lack of another word. Example with a 4khz default filter applied, the audio is roughly 100-4000, however there is a spike...

I don't see anything about them in the notes that come up with the Options button, and the Help button doesn't seem to do anything.

Does anyone know how to make memory tabs B and C look like D?????
I find all the tabs are a bit too busy and distracting for my taste
Capture.PNG

Hello forum community,

first of all please excuse my ugly english...

First of all, I would like to say that I have been using SWL for decades, but exclusively analog. For this I use devices from my collection, mostly FRG-7, FRG-7700, Jennen 9R-59...