It's all about the Software

Hello,

Have a bunch of files in S1b format.
Think, but not sure, they came quite a while ago via the SdrPlay folks.

Still consider myself a real beginner with program.

What's the best way of incorporating them directly into the program for usage...

I have an I/Q recording of the <500 kHz spectrum that I made overnight with SDR Console x3.0.25. software. When I play back the .wav files within SDR Console, I can see digital signals in the waterfall in the 630m ham band.

I'm now wondering if I...

Hi.
Is there a way to lock the center frequency of a desired span from moving when changing receiver (receivers spread across the full band) from one at one end of the span to one at the other end of the span?
As illustrated in the attached...

If I open matrix and select several RX's, can I have an RX on another band, eg; rx1 on 40mtr and rx2 on 80mtr? If so, how?

Hi, could anyone give me an explanation suitable for dummies please?

Some systems, like RFSPACE receivers with SpectraVue, somehow manage to create a very high resolution real time spectrum (say RBW better than 1 Hz) at a reasonable refresh rate...

Not sure what happened. I rebooted my PC (win7) and now I can not get rx AND tx pane windows to open at the same time. In other words, Console starts with TX open (stand-alone), so I click on RX DSP and that opens but tx goes away. so I click on tx...

Hello,

Am beginning to play around with doing a scheduled audio recording for the first
time, and have the following questions, please:

a. After setting it up, I see that the usage for only a 10 minute audio recording (@32 bit Option) is...

Hello,

I can probably guess at the answer, but let me please ask anyway, in
case I'm missing something.

Have never played with the recording function, but thought I would set
it up to make a recording of a station that becomes, hopefully, active...

Hello all

My Win 10 PC will freeze for about 3 seconds about every 30 secs when running the console. I don't lose audio.

If I run the console on another PC with Win 7, it is fine.

The PC with Win 10 has plenty of grunt and a good Video card:...

So recently guessing due to a windows 10 update Virtual audio lines became useless with sdr-console not sure what is causing it.
2 example videos
Audio from sdr-console
Audio from sdr#
quick specs

Been trying different buffer settings to no...

Hello,

What is the simplest and most straightforward method
of seeing which, of the several, databases In Frequency Database Options ), is
open and being displayed for using ?

B.

Hey Folks,

I'm a phd student and I designed my own antenna (magnetic field antenna) that works through a usb audio port - There are a ton of SDR software solutions that work with it, with virtually no setup, but no one piece of software has all the...

Hi
I installed SDR Console V3 on two Win 10 PCs. On one it works as expected, on the other, waterfall and transmit frequency differs by 25 kHz from the reveiving frewquency.
The problem appears with different SDR's (HL2 and AirSpy HF+).
Any hint how...

Hello,

Is 20 the maximum number of Memories allowed ?

B.

Hello,

Using the Memories for the first time.

Re the Filter option that each individual Memory setup has, exactly what is this filter, please ?

How is it used ? When, etc. ?

Thanks, as always,
Bob

Until about 2 weeks ago I had been using the HF+ Discovery, SDRConsole driving 3 receivers on 518, 490 and 486 through VB-Audio Cables into 3 instances of YaND. All worked very well and my only bother was qrm on 490. And then it all went bad……....

Hi,

I have an SDRPlay RSP2-Pro which currently works very well with SDR Uno, I've installed SDR Console but when it starts and correctly identifies the RSP I hit Start and app opens but doesn't Start if that makes sense

Images attached for...

Here's a porker for you Simon. Trying to update V3.0.3 to the latest version. No go, they say:

7dxr.com/4SDR-radio/SDRConsole_error_report_201111-200214.zip

Nick

Trying to update height above ground in Satellite - Home Lat/Lon. Crashes program. Using 3.0.25.

Thanks Stefan VE4SW

A problem I have recently come across (after moving from a Windows 7 to a new Windows 10 PC) is that HRD (which I use for logging only) does not respond after adding a second receiver to SDR Console. Things work perfectly fine if I continuously move...

Hello...

Could anyone help me, please...

How can I hide this window in the console (latest version)?

display.jpg

Thank you!
'73 Andreas

If you have the time to read and possibly answer this???..i will try to explain...( need your help in understanding hl2 visual gain..)

Ftdx3000 vs elad duo vs hl2..

Sdrc v3.025

Getting the best out of the rx..

Using the ftdx3000 as a bench...

Hello,

Using Markers; a really nifty item.

A simple question, please, but have been going around in circles a bit in trying to figure out how.

a. How can I tell from the Markers pull-down Menu, exactly which database is being used ?

b. And,...

Hi,

Is there any reason why the s-meter reading doesn't go below -140 dBm?

I

The signal in the picture above is at (appr) -145 dBm while the S-meter shows -140 dBm.

Or is there a setting that I can adjust to change the minimum value?

73's TooN

I/m trying to modify the 2 meter favorite 144-148. It does not display the full frequency range. I've tried to expand the range by dragging out the range at the bottom of the waterfall and clicking the update icon in the favorites bar. I click off...