It's all about the Software

Match to 3v3b2870

- Options / USB Relay:
> Both links to www.dcttech.com and www.Ucreatefun.com are gone. The sides don't longer exist
If you use HID usb Relay at ebay there are some 1/2/4/8x but I don't know if they work here.
> HELP link...

im using a RTL SDR v3 , this happens when i use the right button of my mouse to move around the frequency or when i click on the center button, and no, this is not a dc spike, this thing its jumping .

This evening I wanted to record a few hours of LRA36 on 15476, so I pointed SDR Console 3.2 at my Airspy, set the bandwidth to 192 kHz, and started recording. Reception was very good for the first hour and a half, then started to fade. After 3 hours...

Hello!
I have a little problem SDR Console 3.2 and above Server not send data to client using RX-888 mk II
I have a computer. To this computer connect a few receivers. On this computer running SDR Console Server. On other computer running SDR...

Hi,

Hi, I use SDR Console as panadapter for IF K3+FCD+. Working fine but randomly accidentally stops meter to show a real value. After some time he shows again. This is repeated accidentally. Screenshot-2023-03-07-193823.jpeg

Dear,

A setup is made with an AOR-AR8600 with 10.7MHz IF Out connected to an RTL-SDR.
The AR8600 is setup as external radio with Rigctl
The RTL-SDR is radio 1
In External Radio options, SDR frequency selection, the IF output with an offset of...

Radio G33DDC with V. 3.3 B2870 Win10 64 most recent MS build.

The console defaults to NR3 on first install, selecting any other NR# ( noise reduction ) or ( turning it OFF) attenuates the audio to a very low unusable level. Selecting NR3...

Hello.

I'm running SDR Console version 3.3 build 2870 (64 bit) on Windows 10.
When moving the mouse over Mode or Filter buttons the labels names changes ramdomly. For example, moving the mouse over Mode ... button its label changes to CW-U and...

May not be a bug but an observation.
SDR Play RSPDX, Virtual audio (Voicemeeter Potato)

The filters appear to leak for lack of another word. Example with a 4khz default filter applied, the audio is roughly 100-4000, however there is a spike...

Hi,

I am testing v. 3.3 version. So far not bad, but noticed that this version is little slow, for example setting frequency is little laggry, and noticed little clicks on sound... set buffer to x4 - thhis setting so far is the best... but still...

Hello,

Thanks for accepting me as a member.

I am having an issue with SDR Console 3.2 with the Waterfall and Spectrum skipping .
This only happens with one specific program called Wavenode which is a Wattmeter USB Device.
None of my other USB...

Hi
I'm not sure if this a a bug, glitch or operator error. I'm using a Yaesu 1200 with SRDPlay Dx and today I noticed my VFO knob no longer tracks in the SDR Console software. The radio is connected and tracking. I can move the mouse within the...

On V3.3 when I click the waterfall AUTO, or click and drag the adjust slider, the audio pops and cuts out while I'm adjusting. Also the audio will pop or cut out on occasion.
I'm running console on a Windows 10 pro, 3.4 GHz processor, 32 GB ram. I'm...

SDR Console 3.3 Build 2848 will crash (at least for me) if there is an attempt to right click on an open area of the toolbar. Since nobody else has posted a report about this, I am not sure if this behavior is unique to me or not. I am able to repro...

Hello! SDR-Console is working *splendidly* for me, with one small exception: the waterfall display is a little bit jittery no matter what I try. First, some details:

Software Version: 2022-09-18_1224.exe
SDR: SDRPlay RSP1A
Machine: old-ish i7-6700T...

Does anyone know whether or not it is expected behavior for Favorites to not work correctly if the DSP Panel is not displayed when switching between Favorites?

The trouble I am observing is if the DSP Panel is not displayed and I switch between one...

Hi, i´m using SDR Radio now for several Years an im very happy with it.
(donatet too)
But when i use the mousewheel to tune often the mode switches to another mode, i.e. usb to lsb.
Is this a bug or a feature?
I can´t find where i can switch it of....

I'm running the latest SDR Console release on Windows 10 21H1 Home (my system has never offered to update past that version for some unknown reason). Hardware is a Core i5-3570K at default clocks, EVGA GTX 960 at default settings and latest...

I’m working on C# code that sends commands to SDR-Console. One of my tasks is to identify the current Mode in SDR-Console. If I select “BC-FM” in Console and send the “MD;” CAT command from my software, I expect to get “MD9;” in return as documented...

New user, have SDRPlay connected to Rcv Out on my IC-7600, nothing connected to Recv In, so using Console for spectrum and audio. I got it working yesterday, but now it won't connect or play anything from SDRPlay. Long story, after I had Console...

I am doing a new post on this because it seems to be a separate issue from the Favorites issue I posted earlier though the Favorites issue is being impacted by this issue.

If you close the DSP Panel in a docked state and then close SDR Console, the...

Not sure if this has been spotted before - on each memory bank if you edit the 3rd memory button there is an extra option labelled Apply . It doesn't do anything though.

Same on 2 pc's. No big deal as it's benign ;)
Capture.JPG

73 John

Hi,

I notice a bug with RFspace SDR-IQ, it was tested with 2 different SDR-IQ, same result.
There is always a strong carrier on the center of spectrum:
I attached 2 screenshot where i swap the center FRQ between 1.850 and 1.875.

73
Pat
ON4AMI /...

Hi Simon,

When opening multiple sequential files that were recorded in SDRuno and editing them with the Datafile Editor, the final edited file is jumping unexpectedly when playing the edited wav file back in SDR Console v3.2. I suspect it could be...

Running a IC7300 with an internal PTRX-7300 panadapter connected to an RSP1A SDR.

I have two RSP1A's and at SDR Console startup I select whichever I want to use. 99% of the time it's the RSP1A connected to the panadapter inside the 7300.

On...