It's all about the Software

I use my SDR as both an enhanced panadaptor for my IC-7300 and as a second receiver. I don't want tracking enabled much of the time - I'm using the two receivers separately. I will watch the SDR waterfall, looking for something of potential...

Hello,

Might it be possible to alter the Frequency box that comes up when pressing a number
such that it also allows the setting of Span ?

Like the box that appears in Home/Frequency which has both.

Thanks for considering.

Regards,
Bob

Special Points Requests

Shaded = For some time this parameter must be reset each time the program is opened. He didn't need it before.

Resolution = The same is true for the value of the chosen resolution, each time the program is opened, the value...

Displaying Markers, Memories and DX Cluster spots in the spectrum display is a great feature but could be so much better if clicking anywhere in the line of text of the Marker/Memory or Spot took you straight to that frequency.

Or if it's too...

I looked thru the list of requests but it was so long...

Can you create a dark theme if you haven't already? also, P25 and DMR, will you ever allow audio? I can decode it but cannot get any audio.

Please consider adding decimal point at the digital signal strength meter, as present in the analog signal meter.

Tnx

73 Rocco IK8XLD

I could not see this on the list but sorry if I missed it.
The matrix or the receiver windows can allow you to have up to 24 receivers open at once.
They have Select, Mute as their options.
Is it possible to add a 'Lock' option.
When selected the...

Hello Simon,

long time ago, I asked about the function (see my older message), but since I didn't got any new or answer.
Function would be temporary allow listen to audio on

For the SDR Console suggestion box:

1. Please consider expanding the Visual Gain setting. Currently it goes from +30 dB to -40 dB in 5 dB steps. I'd like it to go down to at least -75 dB in 3 dB or finer steps. That would allow me to approximately...

It would be very useful to be able to edit the entries set up in the scheduler. One may want to make small changes to when the recording starts and stops, recurrence etc. The option now is Copy , and consequently deleting the old entry after making...

Hi All,

frequently I use a virtual audio cable to transfer audio to 3rd party applications (fldigi, navtex and dsc decoder and few others).
Sometime I need to briefly monitor the audio being transferred, but usually that require some operations on...

When I am chasing NDBs, I do it visually with the waterfall. I use the X8 resolution which is pretty good for closely packed beacons. But there are times when it isn't good enough. I have tried slowing down to 10 lines/sec which makes a smaller bin...

As a Satellite operator
I Want to have the possibility to control the External radio in the Satellite windows with Midi controller and keyboard shortcuts
So that I do not need change the frequency of the connected TX radio with the mouse at the...

Simon,
Would it be possible to produce a piece of software that plots the radiation pattern of a yagi antenna.

Some thing like output 0-360 degrees in say 5 degree steps to the rotator, Then read the signal strength from the SDR in db and plot it...

Could we have a cut-off timer that clears the RDS data and completes the database entry if the RDS is no longer clocking up 'hits'? I would suggest a default value of 30 seconds as a compromise so that a rapidly changing signal doesn't trigger too...

Hi all,
this is my first post and please apologize if i am posting in a wrong thread.
I have to re format my PC and i would like to know if there is a possibility to save all the details, configurations and layouts
of the program so when i re...

On the Perseus V5 software, there is a button ( Center ), which holds the tuning window in the center of the spectrum window as you tune with the mousewheel.
The displayed spectrum slides under the stationary tuning window as you tune.
If console...

Hello user,
I have a problem with the satellite tracker. By mistake I have set 96 hrs in the Time window.
Unfortunately, I can now no longer access the setting after calling the tracker because the prog. immediately after the call to process the...

Dear Simon,

A suggestion that might be useful in future releases.
When getting to the edge of the tuning window with the mouse click down on the receiver, it would be very useful that the receiver starts to scroll.
Let me explain with a picture:...

Could a labelled crosshair cursor be available in the Signal History window, just as there currently is in the main Analyser window? Without it, it’s difficult to find the exact value and position of a peak.

Thank you,

Jack
M0GKC

SO2R implementation with SDR Console:

- two Identities for two independent SDRs such as two ANAN or Hermes Lite etc. as Radio 1 and Radio 2.
- SDR Console would connect the serial port of virtual serial cable back to logging program (N1MM etc.) -...

Hi Simon and others,
The satellite scheduling works well and I would like to use it 24/7 even when I am away for a few days.
What I find lacking to achieve this is the ability to change antennas for the different satellites.
I have three antennas,...

Would be great to add support for Signal Hound Analyzers, to be used as an receiver.
Depending on model it can go up to 20GHz.

Hi,

I'm not sure I have this right.
Will blame it on old age now if I am, as usual, a bit confused.

A long time back I think there were some Posts about the development
of:
additional digital modes right from the program

and of a stand-alone...

Could you please add support for the 0-38.4MHz frequency range? Thanks.