It's all about the Software

Is anyone using the SDR console as a poor man's spectrum analyzer along with an SDR RX and a noise source?
What are the best SW settings for this purpose?

73 de IZAFL

In later versions of the gateware on the HL2 there is a band-volt modification to automatically change the band on a linear amplifier (it sends a specific voltage per-band to the amp).

It's explained here:

This mod implements the generation PWM...

Simon,

At some time in the future, would it be possible to optionally move the Band Plan from the bottom of the pane to the top? It's just a bit less busy in that location.

Thanks!

After running perfectly for several weeks with Phil's KA9Q-radio SW, last Saturday my RX888 suddenly failed.

The failure mode suggests that one or more of the BGA pins of the the FX3 have desoldered, and a FLIR scan of a FX3 showed it running at...

So,

Yesterday evening I finally added optional station times to the display. Will make a kit soon...

Hello,

I have set up here a panadapter with ic-756pro2, with the RTL-SDR on the 1st IF freq.

I have a few issues: when I'm changing frequency with the radio vfo the spectrum update looks slow and not fluid at all. I don't understand the reason...

G'Day
I'm using the very nice sat-scheduler in SDR-C 3.3 and have set recording to automagic. However, according to the description it should save the file including the satellite name. My files are not saved with the sat-name. Have I missed...

I use SDR Console V3.3 with an Adalm Pluto+.

I want this to be seen as a radio by HamRadio Deluxe.

I created a pair on com0com (COM9 and COM10).

I set SDR Console to use COM9 at 57600.

I set HRD to use COM10 at 57600.

Nothing. No communication...

With the new Meteor 2-3, I wanted to add it to the pass list and favorites ribbon.
I have long forgeot how to do that.
I can highlight it and click add, but it does not get added.
I checked the .TLE file and the satellite is there.
Help please on...

With a new Meteor 2-3 now in orbit, I would like to add it to my favorites and top bar.
I thought I remembered how to do that , but have failed every attempt.
I did check in the .tle to ensure the satellite was listed.
Can someone please smarten me...

As your probably aware? MMSSTV has been updated a bit into the 21st century by some EA's over there in Espania , the latest version is 1.13.3 and is on the EA's website and use a translator , YoniQ does have some quirks still .

The YoniQ mode is...

RSPdx , after it was sitting around for a month or so unused , i plugged it in and fired up sdrc and the noise floor indicator needle was at a 8 and the s-meter needle was stuck at a S-9 and nothing i did (adjusting rf-gain/if gain) would get them...

Screenshot-2023-05-26-092033.jpg

I am in the Central time zone, currently observing daylight savings time. Windows 10 is set to show Central time and to adjust for DST.

In the screenshot, the correct PC time is shown on the main clock but the...

Hello, I use an Adalm Pluto with SDR Console on QO-100, and I don't know where to plug the key, and if any special configuration is required.

Thank you for your answers.

73 de Michel F6GLJ

Hello.

I use SDR Console to pilot Adalm Pluto for QO-100 traffic. A question : Where do I connect the key to transmit in CW? And does it require a particular interface or configuration?

73 QRO de Michel F6GLJ

Kind of gave up trying to get the DSD interface* in SDR# to work properly, so perhaps a SDRC version might function better.
With the following proviso; some type of on the fly configuration to avoid having to dig into and edit any bat or cfg files...

Simon,
Recently i built Wolf DUC/DCC Transceiver.
I tested the IQ input with SoftRock XTAL as a receiver its working. Kindly add this Wolf Transceiver in the radio list and other parameter. I am not a developer of the project but i requesting to add...

Hi,
I'm a newcomer to the Pluto and have just received one today. Got all the drivers and it seems to have installed ok. I can see the Pluto in the device manager.
Start up SDR console, add the radio, set the definitions, and hit start.
Everything...

Has anybody experimented using the GPU on the relatively new Intel I750 or other video GPU cards? If so I wonder how it works. The price is not bad at all, about $200US.

{^_^}

Hi

I am using the HL2 with the band-volt modification to automatically change the band on my linear amplifier (it sends a specific voltage per-band to the amp).

It's explained here:

This mod implements the PWM required with a code element in...

Bonjour;
J' utilise SDR Console V3.3 j' ai une déconnexion récurrente du logiciel . Je suis obligé de liquer sur start pour relancer SDR CONSOLE normal ?
merci
Richard

Hello Simon,

On my system the CPU and GPU performance graphs are not indicative of the System Performance tool.

See attached screenshot.

73 Hauke (VK5HW)

Hello,
I have a problem with the mouse in SDR Console, latest version, not beta version. I use Winsows 11 as the operating system.
The problem presents itself as follows:
I can move the mouse in the spectrum, but I can't set any filters, and I can't...

I have created a VSPE virtual splitter port for my rotator so that the World Map can track PSTRotatorAZ. My serial port is COM3 and the splitter virtual port is COM20. While PST works fine on COM20, COM20 isn't listed at all in the World Map port...

First post here, new user of SDR C so I hope that someone has an idea of how to resolve a tuning problem.

Elad FDM Duo as the main receiver (not Remote rcvr) on Com3. Works great with SDR Console but I have a query when using Dx Commander. I can...