It's all about the Software

I have a range of favourites setup for different frequency ranges, allowing me to easily flick back and forth as needed. The issue however is that I need different levels of RF and Visual gain for frequencies above about 30 MHz.

Is there any way...

Hi,

I'm developing a device to remote control the console and I observed an anomally with the MD command using the Serial port (CAT) connection.

As the documentation say (

MD
Mode
Read: MD; returns the current mode.
Write MD ;
Note: the mode...

I have a problem, SDR Console freezes, mostly when I use the satellite function.
You can still hear the sound, but the interface freezes completely and there is no error message.
I have to close the program using the task manager.
I have already...

She enters the forums, looks around, and sees lots and lots of dust all over everything. Air circulation still works. It raised just enough dust she sneezes and coughs, which raises even more dust. She grabs her hanky and covers her nose as she...

For my ic756pro I can click the waterfall or rf spectrum to tune, but it is not reliable, it will miss, and the logs say this when it happens:
SDR>Ext IC-756 Pro> Frequency 7.179.400, BLOCKED

I have confirmed this is the only omnirig piece of...

I would like to request that the ability to switch from internal clock to external clock ( ck1 ) be added. Probably under the radio options tab. As an EME operator, I need an exact frequency reference. It seems that the feature is available in the...

Hello.
Many modern communication systems use unique ACF (autocorrelation) values, so this algorithm would be very useful for rapid system identification. It is also very useful for viewing the PRF of OTHRs.

If this request is accepted and included...

Hi all.

The CROP tool in the Data file analyzer shows the parameters of the selected area.
Perhaps you can ad a control to export those data to the Data File Editor and open it for fine tuning and processing the selected area.

data-export.jpg...

Using Limesdr RX and TX on AO100 in 3.4 console I often have to retry pressing the TX button before the Lime actually transmits. The button changes color every try but the lime only reacts like 50% of the time.

I run 3.4 on both W7 and W11 machines, same driver.

Limesdr is found correctly in device manager.

SDR console cannot find limesdr on the W11 machine.

Today we have the original Pluto Rev C or later plus various Pluto clones. They all support at least 2 RX and TX antennas. Would it be possible in a future release of SDR Console to select which antenna pair you want to use?

Thanks
Johan ZS6JPL

Is it possible ( pretty please) to add the facility to cycle through the filters with a MIDI device as defined in the current mode selection?

As I posted on the IO forum, I find the incremental change of 50hz much too low when in BFM mode.. what...

Hello Friends,

Anyone of you use the card like this SDR 70 MHz-6 GHz Zynq7010+AD9363 with the SDR- Console software ?

Is it possible to manage the 2 RTX channels independently ?

I would like to use it as an RTX driver for an HF radio with IF at...

I have moved to RSP1A, but the behaviour is always the same, issues with this syncro in External radio when tracking is active. why the spectrum is freezed? why without syncro or syncro used for qo-100everything is working?

Radio=>SDR tracking only...

The SDR console recognizes different USB cards, but controls them individually.
It's not possible to have a single PTT command on multiple radios connected to the software.
In my case I have 4 radios and amplifiers in separate boxes, and I can't...

I have just downloaded the latest ver.21.12 of OBS and now I seem to have problems streaming to SDR TV.
Can anyone confirm this or is it me HI.
73 de Paul OE8PCK

Hi Guys

i'm using sdr Lime Mini USB as IF RTX at 72 MHz, with up conversions home made HF Transceiver

To have correct USB/LSB monitor vision on RX , i must use the function Inverted Spectrum starting SDR console.

But on TX, I haven't found how to...

The Pluto+, LibreSDR and Adalm-Pluto Rev C or D both come two RX and TX channels. It is really nice to connect RX1/TX1 to your QO-100 setup and RX2/TX2 to your other setup. It makes life so easy without having to fiddle with SMA connectors every...

From RFSpace's Pieter Ibelings. This looks interesting.

Hi folks,

anyone tried the HamGeek 70MHz-6GHz Zynq7010+AD9363 (link below). I am intrested in qo-100 operations with that board.

73, Holger DG3FEH

I know that both Pluto and LibreSDR work, however, is there a maker / model /version which works better or best?
I have seen a few YouTube reviews of various ones but the mostly show an unboxing and no actual testing or use.
I know that we would...

Hi, Simon. I believe I've found a bug in SDRC's MIDI interface. Windows only allows one application to listen to a Midi controller. Which means that apps need to take into account that a controller might already be used by another app, and if so,...

Down to just a few servers as antennas, ethernet cables, USB cables are all unplugged for the longevity of my fleet of SDR's. Will return once free and clear of storms.

Hello everyone, I really don't know what I'm doing wrong, after half a Sunday searching, reading, filling up ChatGTP with my problem, so I have a help question. I want to see the downlink frequency of a QO-100 beacon in SDR Console v3.3 or 3.4....

I have a channel sounder consisting of 2 USRPs X410, each connected to its corresponding host PC. Both USRPs are connected to an Octoclock, for frequency and time synchronization. Nevertheless, for better time synchronization, there are additional...